LT1161IN#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LT1161IN#PBF is a popular Gate Driver IC in the area of Power Management ICs (PMIC). It is a dual Gate Driver IC used to drive both low and high side N-channel MOSFET switches in a half-bridge circuit. This enables the dual MOSFET to be controlled with a single logic signal. The IC operates from 4.5 to 42 volts, making it suitable for a variety of applications from low voltage to high voltage power converters.

The LT1161IN#PBF has two channels: the low side channel controls an N-channel MOSFET switch, usually located at the negative side of the power supply, and the high side channel controls a second N-channel MOSFET switch, usually located at the positive side of the power supply. Both channels operate with the same logic signal, so only one logic signal is required to control the dual MOSFET. Each channel has a 2A peak source current and 4A peak sink current. This enables the MOSFET switch to be reliably operated at high speed.

The LT1161IN#PBF can also operate in an adjustable delay mode. This allows the dual MOSFET switches to be switched on and off in an adjustable time domain. This is useful for applications such as power factor correction, where the delays are required for precise turn-on and turn-off timing control. The delays are internally traced with a ramping voltage, so no external timing components are needed.

The LT1161IN#PBF features a shut down control pin, which allows the logic control signal to be disabled. This enables the dual MOSFET to be turned off in case of a fault or an over shooting current situation. It also allows power to be conserved when the MOSFET switches are not needed. The IC also features an enable control pin, which allows the IC to be externally enabled, so it can be used in a fail-safe mode.

The LT1161IN#PBF is a very versatile Gate Driver IC. It is used in a variety of industrial, automotive, and consumer applications such as AC/DC, DC/DC, and other power conversion systems. It has a wide operating range, making it suitable for many different applications. It also features adjustable delays, a shut down pin, and an enable pin for safety, making it a good choice for many different applications.

The specific data is subject to PDF, and the above content is for reference