LT3015EQ-15#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear voltage regulators are the most simple and commonly used forms of voltage regulation. The device consists of an adjustable voltage reference, one or more comparators, an output transistor, a pass element and usually several resistors and capacitors. They are used to bring down the input voltage to a more stable and acceptable levels for the device under power. The LT3015EQ-15#PBF is a low drop-out regulator with 3A maximum output current, adjustable output voltage range of 2.5V to 15V, and tight regulation with 1% accuracy through its entire output voltage range.

The LT3015EQ-15#PBF is mainly used in applications such as post-regulator for switching regulators, point-of-load regulators, distributed power architectures and industrial equipment where power consumption is low. The device maximizes efficiency while meeting tight requirements with its low drop-out mode and adjustable voltage range. In addition, the unique reference architecture of the LT3015EQ-15#PBF eliminates the need for an external sense resistor, further contributing to increased system efficiency.

The LT3015EQ-15#PBF device works on the principle of linear regulator which entails the control of the output voltage by varying the output current of the device whenever the input voltage fluctuates. The core of the linear regulator is the reference voltage which is maintained by the two resistor-capacitor networks. The reference voltage is then compared to the incoming voltage using a comparator. If the comparator detects a difference between the two voltages, it triggers an output error signal. This signal is used to drive a pass element or an output transistor in order to adjust the output current of the device. In this case the output transistor works in series with a sense resistor, whose job is to measure the output voltage and fine tune the output voltage. When the input voltage is higher than the reference voltage, the output transistor pulls more current, thus pushing the voltage down to the reference level. Conversely, when the input voltage is lower than the reference level, the output transistor reduces its current, allowing the incoming voltage to rise above the reference level. This process is repeated constantly until the output voltage is regulated to its desired level.

The LT3015EQ-15#PBF device is also equipped with other features such as short circuit protection and over temperature protection. The LT3015EQ-15#PBF features an under-voltage lockout which protects the device when the input voltage drops too low. Additionally, the device is also equipped with an over-current protection feature which protects the device from damage due to overwhelming currents.

In summary, the LT3015EQ-15#PBF is a low drop-out regulator with 3A maximum output current, adjustable output voltage range of 2.5V to 15V, and tight regulation with 1% accuracy through its entire output voltage range. This device is capable of providing stable and reliable power delivery to loads requiring low-voltage operation, and is especially suitable for post-regulators for switching regulators, point-of-load regulators, distributed power architectures and industrial equipment.

The specific data is subject to PDF, and the above content is for reference