LT3015MPQ-15#PBF

Current - Output:	1.5A
Base Part Number:	LT3015
Supplier Device Package:	5-DDPAK
Package / Case:	TO-263-6, D²Pak (5 Leads + Tab), TO-263BA
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 125°C
Protection Features:	Over Current, Over Temperature, Reverse Polarity
Control Features:	Enable
PSRR:	50dB (120Hz)
Current - Supply (Max):	70mA
Current - Quiescent (Iq):	2.4mA
Series:	--
Voltage Dropout (Max):	0.68V @ 1.5A
Voltage - Output (Max):	--
Voltage - Output (Min/Fixed):	-15V
Voltage - Input (Max):	-30V
Number of Regulators:	1
Output Type:	Fixed
Output Configuration:	Negative
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The LT3015MPQ-15#PBF is a high performance, general purpose micropower voltage regulator which offers both high and low voltage dropout capability. The LT3015MPQ-15#PBF range is designed for use in applications including automotive, battery-backed wireless communications, remote antennae and RF, mobile phone, and other voltage regulation applications. It is the perfect choice for tight space and low power applications.

Application Fields

The LT3015MPQ-15#PBF is ideal for a wide variety of low power and tight space applications. It can be used for automotive applications and for battery backed wireless communications, remote antennae and RF, mobile phone, and other applications.The LT3015MPQ-15#PBF is suitable for systems where low voltage and minimum dropout is required. It can be used in any circuit where the input voltage is higher than the regulated output voltage. Its wide range of dropout voltages allows it to operate in any situation where low power consumption is needed.

Features

The LT3015MPQ-15#PBF has a number of features and benefits to offer. It has an input voltage range of 1.2V to 8V, an output voltage of 3.2V, a quiescent current of 2µA, and a minimum dropout voltage of 50mV. It also incorporates an inhibiting circuit to reduce power consumption when in standby mode. Additionally, the LT3015MPQ-15#PBF has fast transient response and is short-circuit protected.

Working Principle

The LT3015MPQ-15#PBF is a linear voltage regulator. It works by connecting two points of the circuit to the same voltage or level of reference. Linear voltage regulation involves dropping the input voltage to a certain level in order to provide an output voltage at the desired level. It is made up of a few components including an input voltage, an output voltage, and a regulating device such as a Zener diode, PNP transistor, or an op-amp. The level of output voltage is determined by the voltage reference. This voltage reference is usually set to the desired level of output voltage. The current flowing through the load is then controlled by the regulating device and is adjusted to the desired output level.

Conclusion

The LT3015MPQ-15#PBF is a high performance and general-purpose micropower voltage regulator. It is well-suited for tight space and low power applications and offers high and low voltage dropout capability. It is suitable for systems where low voltage and minimum dropout is required, and for applications including automotive, battery-backed wireless communications, remote antennae and RF, mobile phone, and other voltage regulation applications. The LT3015MPQ-15#PBF is a linear voltage regulator which works by connecting two points of the circuit to the same voltage or level of reference. It has an input voltage range of 1.2V to 8V, an output voltage of 3.2V, a quiescent current of 2µA, and a minimum dropout voltage of 50mV.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description