LT6013ACDD#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear Amplifiers, Instrumentation, Operational Amplifiers (Op Amps), and Buffer Amps are all useful amplifier designs which employ an output signal proportional to an input signal. One type of amplifier, the LT6013ACDD#PBF from Linear Technology, can be best classified as a linear instrumentation operational amplifier (Op Amp) but its working principle is actually more involved than just that. This article will give some background information on its application field, provide an overview of its principle of operation, and discuss some characteristics of the LT6013ACDD#PBF.

The Linear Technology LT6013ACDD#PBF is a linear instrumentation Op Amp designed for precision analog signal conditioning, signal gain, and signal filtering. It can be used in a wide variety of applications such as signal conditioning in medical device, consumer electronics, and industrial control systems. Its main purpose is to amplify the input signal before it enters a signal processing stage, where the signal is further modified or analyzed. It is also often used in signal-to-noise (SNR) ratio measurement and signal thermal imaging.

In order to further elaborate on its application field, it is necessary to discuss its working principle. The LT6013ACDD#PBF is basically a voltage follower, meaning that its output signal follows the same magnitude and direction as its input signal. However, due to the feedback mechanism implemented in the design, it has the capability to amplify the signal. Specifically, it consists of two stages, an input stage and an output stage. The input stage is an inverting amplifier made of two p-channel junction field effect transistors (JFETs) with a particular transfer function based on the transconductance parameters of the transistors. This transfer function allows for the adjustment of the gain of the input stage. The output stage is an inverting amplifier, also consisting of two JFETs. The gain of the output stage is determined by the resistance values of two parallel resistors connected in series between the source and drain terminals of the second JFET, as well as the transconductance parameters of both JFETs.

The LT6013ACDD#PBF features three separate outputs, one for the inverting output, one for the non-inverting output, and one for the output common-mode voltage. Its voltage swing is typically between + 15 and -7V, with an output current of 15mA. Its output noise is less than 1mVrms, making this a very high performance amplifier. Its slew rate varies between 1V/μs and 1.5V/μs and it has a very low input offset voltage of ±1mV. The LT6013ACDD#PBF also comes with a shutdown feature to reduce the power consumption when not in use.

In summary, the LT6013ACDD#PBF is a linear instrumentation Op Amp designed with precision analog signal conditioning and signal gain in mind. Its principle of operation involves two stages, an input stage and an output stage. It has three output, good voltage swing, great output noise performance, a low input offset voltage, and a shutdown feature. Consumers should take into account their needs when deciding whether the LT6013ACDD#PBF is the right amplifier for their application.

The specific data is subject to PDF, and the above content is for reference