LT6658AIMSE-1.2#PBF

Temperature Coefficient:	10ppm/°C
Base Part Number:	LT6658
Supplier Device Package:	16-MSOP
Package / Case:	16-TFSOP (0.118", 3.00mm Width) Exposed Pad
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C (TJ)
Current - Supply:	3.2mA
Voltage - Input:	4.5 V ~ 36 V
Noise - 10Hz to 10kHz:	2ppmrms
Noise - 0.1Hz to 10Hz:	0.8ppmp-p
Series:	--
Tolerance:	±0.05%
Current - Output:	20mA
Voltage - Output (Max):	6V
Voltage - Output (Min/Fixed):	1.2V
Output Type:	Adjustable (Fixed)
Reference Type:	Series, Dual
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to LT6658AIMSE-1.2#PBF
The LT6658AIMSE-1.2#PBF is a low-dropout (LDO) voltage regulator that has been specifically designed for applications requiring precise control of output voltage and ultra-low output noise and ripple. It is ideal for single-cell Li-ion or Li-polymer battery-powered system applications such as portable medical devices, consumer electronics and other low-voltage system requirements.Application Field and Working Principle of LT6658AIMSE-1.2#PBF
The LT6658AIMSE-1.2#PBF is an ideal and highly accurate low-dropout voltage reference solution that is optimized for applications where precision voltage accuracy and ultra-low noise and ripple is of paramount importance. The device is designed such that it is optimized to provide precise positive or negative output voltages over a wide range of temperatures and to minimize battery drain due to quiescent current draw.The LT6658AIMSE-1.2#PBF is used in a variety of different applications as a low-power voltage reference to provide precise power and voltage references for small system solutions. One of the main advantages of using the LT6658AIMSE-1.2#PBF is its excellent power supply rejection (PSR) performance, making it extremely attractive for small systems that need precise reference voltages. The LT6658AIMSE-1.2#PBF offers both excellent PSR performance and low noise performance, making it suitable for high-accuracy analog and digital circuits.The LT6658AIMSE-1.2#PBF has a versatile input voltage range of 4.5V to 34V and can support output voltages of 0.25V to 4V. The device also has a low quiescent current of only 8µA, enabling it to run cooler and with less power consumption. The typical dropout voltage of the LT6658AIMSE-1.2#PBF is only 46mV at full load, making it an ideal solution for Li-Ion and Li-Polymer battery-powered applications.The LT6658AIMSE-1.2#PBF is designed to provide very accurate output voltage regulation, with ultra-low output voltage ripple and very low noise. This is achieved by using a high-performance, high-bandwidth Op-Amp and P-channel linear regulator circuit. The device also features compensated and filtered output, which allows for ultra-low noise performance.In addition, the LT6658AIMSE-1.2#PBF has other features such as programmable or fixed output capability, shutdown control and built-in soft-start capability. The device also provides excellent transient response, with 2µs of recovery from a 1V output voltage deviation and 5µs from a 2V deviation.The LT6658AIMSE-1.2#PBF is also designed with a wide range of over-current, short-circuit, overtemperature and overvoltage protection as well as remote sensing capability. All these features make the LT6658AIMSE-1.2#PBF an ideal solution for applications requiring precise control of output voltage and ultra-low output noise and ripple.Conclusion
In conclusion, the LT6658AIMSE-1.2#PBF is an ideal low-power voltage reference solution that is designed to provide precise positive or negative output voltages over a wide range of temperatures and to minimize battery drain due to quiescent current draw. It is optimized for applications where precision voltage accuracy and ultra-low noise and ripple is of paramount importance, and has a versatile input voltage range of 4.5V to 34V and can support output voltages of 0.25V to 4V. The device also has a low quiescent current of only 8µA, enabling it to run cooler and with less power consumption. The LT6658AIMSE-1.2#PBF is also designed with a wide range of over-current, short-circuit, overtemperature and overvoltage protection as well as remote sensing capability. It is therefore an ideal solution for applications requiring precise control of output voltage and ultra-low output noise and ripple.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description