LTC1143LCS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC1143LCS is a DC-DC switching regulator controller developed by Linear Technology Corporation. It is typically used to power an analog or digital bus with a voltage between 1V and potential range achievable with a 10V external charge pump, and the output current is adjustable up to 2A. This IC is categorized as a PMIC component, and specifically falls under the voltage regulators and DC-DC switching controllers category.

The LTC1143LCS is designed to have an input voltage range from 2V to 40V, meaning it can be used for applications running on batteries or from an adapter. The current can be adjusted using the internal current sensing circuitry, and voltages can be set from 1V to 10V to supply the voltage needed. This IC also has an startup current adjustment circuit.

The LTC1143LCS includes a pulse-width modulation (PWM) controller, a high-side power MOSFET and an analog error amplifier. It also uses external resistors, a reference voltage, and a minimum of two capacitors to control the output voltage. The PWM controller generates periodic pulses of variable width. This pulse width controls the power applied to the MOSFET when the feedback loop is in regulation, thereby controlling the output voltage.

The power MOSFET, which acts as a switch, is actually switched on and off at a frequency controlled by the PWM Controller. The analog error amplifier is used to sense the voltage across the sense resistor and compare it to the set voltage to detect possible output voltage discrepancies. The ratio of the on time versus the total time of the period is adjustable with the PWM controller.

The LTC1143LCS also features built-in protections, such as short circuit protection, and thermal shutdown. The short circuit protection prevents the output current from exceeding the programmed limit, while the thermal shutdown limits the power dissipation by shutting off the MOSFET switch. These protections help to ensure that the device is protected from potential damage caused by excessive current or temperature.

In summary, the LTC1143LCS is a DC-DC switch mode regulator controller designed for applications requiring voltage ranging from 1V to 10V and current adjustment up to 2A. It is categorized as a PMIC component, and specifically falls under the voltage regulators and DC-DC switching controllers category. It utilizes a PWM controller, a high-side power MOSFET, an analog error amplifier and external resistors, a reference voltage, and at least two capacitors to control the output voltage. Additionally, it comes with built-in protections, such as short circuit protection and thermal shutdown, to protect the device from potential damage.

The specific data is subject to PDF, and the above content is for reference