LTC1285IS8#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LTC1285IS8#TRPBF (LTC1285) is an 8-bit, low-power, CMOS, Analog-to-Digital Converter (ADC) with an onboard Simultaneous Sampling S/H Circuit (sample and hold). It is a general purpose ADC designed for both low power and cost sensitive applications. It uses an on-chip clock oscillator and a Flash memory to store calibration data and is suited for applications where space is at a premium.

The LTC1285 uses a single-ended input from a voltage, current or sensor source. For applications where a differential input is required, there is an optional on-chip differential input on the chip. The on-chip S/H amplifiers are used to ensure high accuracy, low power, and fast response time for the ADC. Another unique feature of the LTC1285 is its ability to be externally calibrated. This allows for more accurate data acquisition and increases overall accuracy and stability of the system. The optional pre-selection comparator provides an additional level of accuracy adjustments before the ADC conversion takes place.

The low-power and cost-effective advantage of the LTC1285 makes it suitable for many applications, such as sensors, temperature sensing/ measurement, automotive systems, medical/ life sciences, data acquisition, and process control, among others. It is also a great choice for industrial and consumer applications that require accurate data acquisition and low power. The LTC1285 is designed to operate over a wide temperature range of -40°C to +85°C, and its accuracy is within ±1 LSB (Least Significant Bit).

The LTC1285IS8#TRPBF is composed of several components that work together to provide its functionality. The ADC consists of a comparator, sample-and-hold, voltage reference, preselector, converter stage, registers, timing, sequencing and calibration circuitry. The comparator receives the input signal and sends it to the sample-and-hold stage, which holds the signal before it is sent to the reference. The reference then compares the signal to a predefined voltage and adjusts the voltage depending on the mismatch. After the reference adjusts the voltage, it is sent to the preselector and converter stage, which converts the analog signal into a digital signal.

The registers store the digital data, and the timing and sequencing circuitry control the conversion and data read-out sequence. Calibration circuits use an internal flash memory to store calibration data. This allows the LTC1285 to be externally calibrated to fine-tune its accuracy at specific voltage or resistance levels. Lastly, a power-down feature allows the user to conserve power when the device is not in use.

The LTC1285IS8#TRPBF is a low-power, low-cost Analog-to-Digital Converter (ADC) that can be used in a wide variety of applications where accurate and reliable data acquisition is a priority. Its single-ended and differential input architecture, on-chip clock oscillator, and flash memory make it an ideal product for cost-sensitive and space-constrained designs. It also offers external calibration capabilities that can be used to increase overall accuracy and reduce power consumption. The LTC1285IS8#TRPBF is an excellent choice for applications that require reliable data acquisition, low power consumption, and high accuracy.

The specific data is subject to PDF, and the above content is for reference