LTC1294DCSW#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LTC1294DCSW#TRPBF, like other data acquisitions, analog to digital converters (ADCs) and digital to analog converters (DACs) are special purpose integrated circuitry used to convert analog signals into digital signals and vice versa. LTC1294DCSW#TRPBF is a low power, low voltage 12-bit monolithic multicomponent converter (MMC) with a built-in voltage reference.

This IC is capable of translating an analog input voltage into an equivalent digital output. The LTC1294 also features fast conversion rates and a low power consumption of just 85uA. It supports a wide input voltage range, up to ±13V on the unipolar scale, and a compliance range of ±2V on the bipolar scale. It also has a fast settling time of only 10μs.

LTC1294DCSW#TRPBF’s applications include industrial, automotive, telecommunication and medical devices. It can be used to acquire data from sensors and other analog devices and transmit it to a digital processor. It can also be used to control actuators and other digitally controlled analog components. It is often used in automatic test equipment, video-adaptive systems, remote sensing, and automotive safety systems.

The LTC1294DCSW#TRPBF\'s working principle is based on a single-slope integration technique. The device reads in an analog voltage, converts it to a digital number, and stores it in an internal latch. The LTC1294DCSW then computes the equivalent digital output and outputs it. The device also includes a reference voltage source and a voltage switching resolution circuit to ensure accurate and stable readings. The reference voltage is adjustable, allowing the LTC1294DCSW#TRPBF to be programmed for different conversion ranges.

The device\'s digital output is provided in latched serial or parallel format. This output can then be read out by connecting the LTC1294DCSW#TRPBF to an appropriate serial or parallel interface. The output can also be sent to a microcontroller or other digital processor for further processing.

To ensure that the LTC1294DCSW#TRPBF provides a consistent output, the device includes an Automatic Gain Control (AGC) loop. The AGC loop adjusts the device\'s gain and offset parameters to account for any environmental, temperature, or aging-related variations in the analog input signal.

In addition to its high accuracy, the LTC1294DCSW#TRPBF features fast conversion speed and low power consumption. The device is capable of operating in either the single-conversion or continuous-sampling modes. In the single-conversion mode, the device will only convert one analog sample before pausing until the next conversion request is received. In the continuous-sampling mode, the device will continuously convert analog samples, providing a steady stream of digital data.

Overall, the LTC1294DCSW#TRPBF is an ideal solution for applications that require a square wave device to convert analog signals into digital format at a high rate of speed and accuracy. The device is relatively low power, enabling it to be used in a wide range of embedded systems. Its wide input voltage range and reference voltage adjustment feature make it suitable for a variety of applications, including automotive, medical, and telecommunication.

The specific data is subject to PDF, and the above content is for reference