LTC2281CUP#PBF

The LTC2281CUP#PBF is a dual channel 8-bit ADC (Analog to Digital Converters) from Linear Technology speciffically designed for a range of applications. It combines high speed, accuracy, low noise and low power dissipation into one integrated circuit. The ADC features differential inputs, is bandwidth limited and has a wide input voltage range.

The maximum input voltage is +/- 5V and the input range is 0V to 5V. It uses a 12-bit successive approximation ADC (SAR) architecture and includes an integral track and hold amplifier. The output is in binary format, with 8 bits of resolution, with an oversampling rate of 1Mbps.

The power consumption of the LTC2281CUP#PBF is very low. It has a low power standby mode which allows the current to be reduced to just tens of microamps. The design is also highly efficient, with a peak current of only 17mA and a low quiescent current of 1mA.

The LTC2281CUP#PBF is suitable for a range of applications, including automotive, industrial, medical and consumer electronics. It is particularly well-suited for use in precision measurements, such as in medical and laboratory instrumentation devices, automotive engine control systems and data acquisition systems.

The LTC2281CUP#PBF is a highly reliable and accurate ADC. It has a high signal-to-noise ratio (SNR) of 87dB and a total harmonic distortion (THD) of -96dB with a 4kHz input signal. It also features a low latch-up current of 1 microamp and has a distortion cancellation circuit to minimise crosstalk.

In operation, the LTC2281CUP#PBF accepts analog input signals and uses its on-chip track and hold amplifier to sample and hold the signal until conversion takes place. It then uses the 12-bit SAR architecture to convert the analog input signal into a digital output.

The LTC2281CUP#PBF is a highly accurate and reliable digital to analog converter from Linear Technology. It is ideal for a range of applications, from automotive to consumer electronics, industrial, medical and laboratory instruments. It features a highly efficient and low power consumption design, with a peak current of only 17mA and a low quiescent current of 1mA. It is also highly accurate, with a SNR of 87dB and THD of -96dB.