LTC2305IDE#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog to digital converters (ADCs) are electronic components that convert analog signals into digital signals for processing by digital systems. The LTC2305IDE#PBF is a differential, low-power, low-noise, 16-bit ADC, typically used to convert a single-ended or differential signal into digital form. This ADC is ideal for use in high operating temperature and electromagnetically harsh environments due to its low power, wide operating temperature range, and high levels of EMC immunity, as well as its excellent linearity and SPAN performance. The LTC2305IDE#PBF is designed for multiple applications, including medical, telecom, consumer and industrial electronics, auto audio and navigation systems, and data acquisition and control.

The LTC2305IDE#PBF consists of two identical ADCs, each of which can be operated independently or together in differential mode. Each ADC converts an analog signal into a 16-bit digital data word. The converter can take a single-ended input, a differential input, or a pseudodifferential input. The input voltage range of the ADC is ±5V, with an absolute maximum rating of ±6V. The converter has an input offset voltage of ±25mV and a typical input bias current of 2nA. It can handle up to 500ksps of throughput and delivers a wide dynamic range of up to 93dB in differential mode.

The LTC2305IDE#PBF includes a switched-capacitor track/hold (T/H) and a precision sample-and-hold amplifier, in addition to the two 16-bit ADCs. The switch array contains two on-chip sample-and-hold circuits, which can be used for either two single-ended inputs or one differential input. The track/hold input level circuitry is also integrated on-chip, with an adjustable gain that can be controlled using an external resistor.

The LTC2305IDE#PBF works in two basic modes, single-ended and differential. In single ended mode, the ADC accepts an input voltage range of 0 to 5V. In differential mode, the input voltage range can be varied both in magnitude and polarity, depending on the selection of external components. Both single-ended and differential inputs can be selected by applying logic voltage levels to the MUX1 and MUX0 pins at the start of a conversion cycle.

The LTC2305IDE#PBF includes an on-chip clock generator that is used to control the sampling and conversion process. The clock generator supports a wide range of sampling frequencies, from 250kHz to 6Mhz. The ADCs use an internal reference voltage, which can be varied from 2.5V to 3V with the trim voltage applied at the REF pin.

The LTC2305IDE#PBF also includes a digital interface that can be used to control various functions, such as power-up reset, the system clock, the interrupt signal, and the input multiplexing. The serial data interface allows the user to read or write output codes and perform an additional 256-word calibration. The I/O pin is used to readback the output codes. The digital interface also can be used to control the internal clock generator, which is used to determine the sampling rate at which data is converted.

The LTC2305IDE#PBF is an ideal choice for applications requiring high accuracy with low power consumption. It integrates two ADCs, track/hold and sample-and-hold circuits, and a digital interface into a small, low-power package. It operates over a wide temperature range, making it suitable for harsh environments. Additionally, it offers excellent linearity and SPAN performance and supports very high throughput.

The specific data is subject to PDF, and the above content is for reference