LTC2309IUF#PBF

Number of A/D Converters:	1
Base Part Number:	LTC2309
Supplier Device Package:	24-QFN (4x4)
Package / Case:	24-WFQFN Exposed Pad
Operating Temperature:	-40°C ~ 85°C
Features:	Selectable Address
Voltage - Supply, Digital:	5V
Voltage - Supply, Analog:	5V
Reference Type:	External, Internal
Architecture:	SAR
Series:	--
Ratio - S/H:ADC:	1:1
Configuration:	MUX-S/H-ADC
Data Interface:	I²C
Input Type:	Differential, Single Ended
Number of Inputs:	8
Sampling Rate (Per Second):	14k
Number of Bits:	12
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Analog to Digital Converters (ADC) is a field of electronic engineering which involve the conversion of analog signals into digital signals. The LTC2309IUF#PBF is one of the most commonly used ADC chips in this field. This chip is designed to convert analog signals into 12-bit digital data at sampling rates up to 200kHz which can be adjusted according to the user’s requirement.The LTC2309IUF#PBF is available in a wide range of packages, from TSSOP-16 to QFN-24, which makes it suitable for a variety of applications and provide wide versatility for the user. The chip also provides a variety of inputs, such as unipolar at ±5V, ±4V, ±3V, 0 to 5V, 0 to 4V, or 0 to 3V, as well as bipolar input at ±5V, ±4.096V and 0V to ±4.096V. This variety of inputs and a wide range of packages make it suitable for many applications, such as automotive, industrial, computer, communications and other types of electronic equipment.The LTC2309IUF#PBF is designed with a sample-and-hold circuit which samples the analog input and hold it until it is converted into a digital value. The chip is also designed with a low power consumption, allowing it to be used in power sensitive applications. In addition, the chip can be programmed to acquire data in 4-wire or 3-wire mode, allowing the user to select the best mode for their application.The working principle of the LTC2309IUF#PBF is quite simple. The analog input signal is connected to the chip, and then the voltage is measured by the internal sample-and-hold circuit. The analog-to-digital conversion is performed by a successive approximation register (SAR), where the chip samples the input and computes the results and then sends them to an output pin. The digital output of the chip varies from 0 to 1 in accordance with the reference voltage range.In conclusion, the LTC2309IUF#PBF chip is an ideal choice for analog-to-digital conversion. The wide range of packages, the low power consumption and the ability to be programmed for data acquisition in both 4-wire and 3-wire mode make this chip useful for a variety of applications. This chip also allows users to perform high-speed sampling and deliver precise, accurate digital output at a high resolution.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description