LTC4315CDE#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC4315CDE#TRPBF is an interface-signal buffer, repeater, splitter designed in a small footprint 8-pin DFN package. It is suitable for various signal buffering and multiplexing applications. The range of signal frequencies and levels this device can operate over makes it a appropriate for a multitude of signal conditioning uses.The LTC4315 operates in low voltage and temperature range of 2.7V to 8.5V and -40°C to +125°C respectively. It features a wide differential input voltage range of 0V to 7V which is further split into separate output supply pairs of regulated lower and higher voltage swings. The input to output capacitance is also within the rated limit of 30pF.

The basic operation of the LTC4315CDE#TRPBF is relatively straightforward. It consists of a differential receiver which senses the input signal, followed by a multiplexer stage which selects either the regular or inverted input versions of the signal for further amplification. The amplified signal is then fed to the output via power amplifiers.The output voltage swing is adjustable by means of an external resistor for each output pair which is placed between the VSENSE and VCA pins. By adding or subtracting from these resistors, the output voltage swing can be changed from the nominal voltage range to either higher or lower voltages, depending on the application.

The LTC4315CDE#TRPBF has the additional feature of in-line break detection, making it a suitable device for detecting open connections in systems with multiple serially connected devices. This feature is enabled when the CON pin is connected to the power supply pin which then reduces the output voltage further in the case of an open-state to an almost ground level so that any further connected devices may be able to detect it as an open connection.

The LTC4315CDE#TRPBF device is suitable for power systems, motors, controllers and analog sensor applications where multiplexing, signal buffering and repeating need to be done. It is especially helpful in applications where various supply levels, or multiple signals from various sources are needed to be interconnected.This device can also be used for logic-level interfacing of various ambient-sensing components such as light sensors and other temperature and humidity detectors.The LTC4315CDE#TRPBF is ideal for a wide range of interface-signal buffer, repeater and splitter applications due to its high efficiency, small size, and a wide range of operating temperatures and voltages.

The specific data is subject to PDF, and the above content is for reference