LTC6401CUD-8#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC6401CUD-8#PBF is a special purpose linear amplifier utilized in various applications. This amplifier is a precision, low noise, high impedance, DC-coupled input/output differential amplifier with an adjustable gain that can be controlled by control voltage. The amplifier can be used in various applications including antenna current sensing, electromagnetic wave sensor systems, frequency converters, amplitude modulators, and audio amplifiers.

This amplifier features a wide gain range (1 to 56 dB) over different frequency ranges and has low distortion performance with a wide dynamic range. Its differential gain and phase response are flat and the noise figure remains constant. The amplifier also has low input and output noise low warm-up drift and low current draw. The LTC6401CUD-8#PBF has a low input bias current, allowing it to be used in high impedance applications where the common-mode voltage is low and the differential input voltage is small.

The amplifier is provided with a supply voltage that can range from +3.3 V to +5 V and the current consumption ranges from 12 mA to 16 mA. The amplifier’s input and output stages are protected against current overload, short-circuit and thermal protection. The amplifier uses a four-pin SOT-23 package with Ptot and Tj max of 410 mW and 175 °C respectively.

The working principle of the LTC6401CUD-8#PBF is based on a closed loop operation. The signal is provided to the amplifier’s input stage and its gain is adjusted by varying the control voltage. The signal is then amplified and fed to the output stage, where the magnitude of the signal is adjusted. The output signal is then compared to the reference voltage, which is used to control the amplifier’s gain. This feedback loop helps to maintain a stable gain over the entire frequency range.

The LTC6401CUB-8#PBF is a versatile amplifier that can be used in a wide range of applications. It can be used to measure the current through an antenna or to drive a power amplifier in an audio system. It can also be used in frequency converters and amplitude modulators. This amplifier is ideal for applications that need low noise operation and wide dynamic range.

The specific data is subject to PDF, and the above content is for reference