LTC6406IMS8E#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LTC6406IMS8E#TRPBF is a special purpose amplifier from Linear Technology specializing in the line driver application. This particular model number is designed specifically for FPGA and ASICs, with integrated termination, LED drivers, and latch up protection with a fast shutdown feature. It is specifically designed for high performance applications that require wide bandwidth, low distortion, and low power consumption.

Its feature set makes it ideal for use in many applications which require high speed, low distortion signals. These include applications in the fields of automotive, industrial, optical, telecommunications, broadcast and other embedded systems. It has been used in applications such as video processing, radar, machine vision, LIDAR, and many other fields. The LTC6406IMS8E#TRPBF also has significant benefits in comparison to traditional line drivers, such as wide range of operating power, integrated bias current and better overall performance. Furthermore, it has been used as a special purpose amplifier in applications such as active matrix displays, infrared imaging, data communication and microwave applications.

The LTC6406IMS8E#TRPBF is designed to operate from a single +3.3 V or +5 V power supply. It provides two output stages, each capable of driving industrial-level differential signals. The amplifier can deliver power-supply independent operation or two level operation along with differential output current. The two output stages operate independently, allowing for single or dual output stages to accommodate different application requirements. The LTC6406IMS8E#TRPBF features a 50MHz bandwidth, 0.004% THD+N, 1GHz slew rate, and +6V/-10V common mode voltage range.

In terms of its working principle, the LTC6406IMS8E#TRPBF amplifies an input analog signal through use of negative feedback and is able to provide isolation between input and output channels. The noise performance and common mode rejection of the amplifier depend on the gain selected, the feedback configuration, and the value selected for the feedback resistor. The LTC6406IMS8E#TRPBF is made up of two Operational Amplifiers (OpAmps) with a differential output stage. The two OpAmps use two separate amplifying paths, each designed with their own input and output stages. These two amplifying paths are connected in parallel to produce a differential output. Additionally, the two OpAmps are connected in series with the feedback path. The amplifier has an active current mirror structure which ensures equal currents for the two OpAmps and therefore equal gain for both channels.

The LTC6406IMS8E#TRPBF is designed to provide two output levels (Full: 6V and Half: 10V). This feature can be controlled by the Shut Down control voltage. If the Shut Down control voltage is low, the amplifier will drive the differential outputs high. If the Shut Down control voltage is high, the amplifier will drive the differential outputs low. The amplifier contains internal bias circuitry which enables the single voltage control to be used for both output levels. The Shut Down control voltage is applied externally and the amplifier is disabled within 2 microseconds.

The LTC6406IMS8E#TRPBF is a highly specialized amplifier designed for a range of applications in the fields of automotive, industrial, optical, telecommunications, broadcast, and embedded systems. It has improved noise performance, higher bandwidth, faster shutdown capabilities, and enhanced common mode range. Its feature set makes it ideal for use in applications requiring fast and low distortion signals. The active current mirror structure ensures that the differential outputs of the LTC6406IMS8E#TRPBF are of equal gain and its current mirror structure ensures that power consumption is kept to a minimum.

The specific data is subject to PDF, and the above content is for reference