LTM4677EY#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters refer to devices that convert energy between two circuits with different DC voltages. The LTM4677EY#PBF is a type of DC DC Converter which allows transfer of energy from one circuit with an output voltage Vout to another circuit with an input voltage Vin. It features just two pins – EN and GND and has a maximum output voltage of 8 V.

The LTM4677EY#PBF is a single-channel, low-side synchronous, step-down power module. It uses a switch-mode power supply to convert high-voltage DC power sources such as batteries, solar panels or AC-DC adapters to lower voltages, such as 5V, 3.3V, 2.5V, and 1.8V, suitable for electronic devices such as mobile phones, tablets, and laptops.

The LTM4677EY#PBF utilizes the buck converter topology which employs both a low-side switch M1 and a high-side switch M2 connected in series, with the Vin, Vout and GND terminals on the left side and the EN signal connected to the right side. The EN signal triggers the M1 and M2 switches and acts as a control signal for the step-down device.

The LTM4677EY#PBF step-down device operates using a hysteretic or PFM (pulse frequency modulation) current-mode control scheme scheme, wherein the output voltage Vout is regulated by a varying on-time (tON) of M1 and M2 based on the input voltage Vin. During an active cycle, M1 turns ON for a period of tON and then turns OFF. This reduces the energy taken from the power source Vin. Also, when the M2 switch turns ON, it charges the output capacitor CO in order to store the energy taken from power source Vin. The difference between Vin and Vout is the sum of the losses (voltage drop) through M1 and M2, which can be estimated using power loss calculations. The output voltage is only regulated when the EN signal is LOW.

The LTM4677EY#PBF has a wide range of applications. It is used in systems where large amounts of power needs to be converted from a high voltage to a lower one. For example, it is used in automobile systems, portable devices, and home electronics such as TVs, computers, and home entertainment systems. Additionally, it can also be used as a general-purpose power supply or a voltage regulator for LEDs in lighting systems.

The LTM4677EY#PBF is a versatile step-down DC DC converter which can be used to convert energy from high-voltage sources to low voltages. It is ideal for use in applications where high power and low input voltage are required. Its simple design, robust construction, and ultra-low power loss makes it an attractive choice whenever power efficient and reliable power conversion is necessary.

The specific data is subject to PDF, and the above content is for reference