Allicdata Part #: | LUR220A-ND |
Manufacturer Part#: |
LUR220A |
Price: | $ 0.00 |
Product Category: | Industrial Controls |
Manufacturer: | Crouzet |
Short Description: | VLTGE CTRL RLY, 11-PIN, 220VAC |
More Detail: | N/A |
DataSheet: | LUR220A Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | UR |
Part Status: | Obsolete |
Type: | Voltage Sensing AC/DC |
Trip Status: | Energized High |
Trip Range: | 0.1 ~ 400V AC/DC |
Delay Time: | No Delay |
Voltage - Supply: | 220VAC |
Output Type: | Relay |
Circuit: | SPDT (1 Form C) |
Contact Rating @ Voltage: | 10A @ 250VAC |
Mounting Type: | Socketable |
Operating Temperature: | -20°C ~ 60°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The LUR220A is a current and voltage monitoring relay, which can be used to detect and compare the mains and other power system loads. It provides current and voltage monitoring, alarm points, adjustable trip times and relay output points with two relays. It can be used to monitor AC current and voltage as well as DC current and voltage, and can be used in a wide range of applications, from industrial factories to commercial buildings.
The LUR220A is designed to be a simple and cost-effective solution for current and voltage monitoring. Its simple design makes it easy to install and configure. It uses four isolated analog inputs that can support either AC or DC current and voltage and two relay outputs. The two relay outputs can be used to control external devices for operation, alarm, or trip.
The working principle of the LUR220A is based on a comparison of measured values with external setpoints. When the measured value of either AC or DC current or voltage exceeds its setpoint, the relay will trip and switch its associated output. This can be used to shut down or isolate a load in case of an overload or an underload condition. The device also provides adjustable trip times and adjustable hysteresis for both current and voltage monitoring. The device can be programmed via potentiometers or through RS-485 communication. In addition, it also offers an LED indicator for visual indication of the device status.
The LUR220A can be used in a variety of applications such as industrial process control, temperature control, motor control, and process automation. It can also be used for monitoring AC and DC mains and loads in commercial and residential buildings. Its simple design and wide range of features make it a versatile and reliable monitoring solution.
In conclusion, the LUR220A is a reliable and highly versatile current and voltage monitoring relay that is designed for a wide range of industrial and commercial applications. It provides adjustable trip times and adjustable hysteresis for both current and voltage monitoring. Its two relay outputs can be used for alarm or trip functions. It can be programmed via potentiometers or through RS-485 communication. It is an ideal solution for monitoring and controlling the power system of a building or an industrial plant.
The specific data is subject to PDF, and the above content is for reference
CURRENT SWITCH 5-50A
21-890=WILMAR POWER MONITOR
RELAY CUR SENSE 24VDC 5-5A
REL AC GROUND FAULT SENS 120VAC
3-PHASE OVER/UNDER VOLT RLY
TACH RLY 300 RPM 115V