M24C08-WMN6TP

Write Cycle Time - Word, Page:	5ms
Base Part Number:	M24C08
Supplier Device Package:	8-SO
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C (TA)
Voltage - Supply:	2.5 V ~ 5.5 V
Memory Interface:	I²C
Access Time:	900ns
Series:	--
Clock Frequency:	400kHz
Memory Size:	8Kb (1K x 8)
Technology:	EEPROM
Memory Format:	EEPROM
Memory Type:	Non-Volatile
Part Status:	Not For New Designs
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MemoryM24C08-WMN6TP is an 8K-bit EEPROM memory chip with a variety of features and capabilities. It offers a small-package design with a large capacity, high reliability and fast programming. This EEPROM memory chip is available in different packages and pin configurations, with either 32-pin or 8-pin SPI configurations. Applications The M24C08-WMN6TP can be used in a variety of applications. It is suitable for low-speed serial bus systems, such as serial Peripheral Interface (SPI) and I2C. Additionally, it is often used for storage of non-volatile data in consumer, industrial, medical and military applications. It is also well-suited for memory expansion in industrial controllers, embedded systems, mobile devices, and microcontrollers. The M24C08-WMN6TP chip can be used for code storage, parameter and configuration memory, or for storing firmware or boot codes. It can also be used for storing sensor data, audio data, video data, or for storing temperature or power settings. The M24C08-WMN6TP can be used in automotive applications, such as storing vehicle diagnostics or performance data, in addition to applications such as cellular phones, digital cameras, and personal digital assistants (PDAs). Features The M24C08-WMN6TP offers a range of features. It has a wide operating voltage range of 1.8 to 5.5V, which allows it to be used in a variety of applications. It also has a low-power CMOS design. The low operating current of 0.9mA and the standby current of 0.12mA allow it to be used in battery-powered systems. The chip features a fast programming time of 10ms and an erase time of 2ms. A 2M-bit/s data rate is also offered for the faster versions of the M24C08-WMN6TP chip. Additionally, the chip has a high-reliability 31K-byte/program lifetime, with a minimum data retention of 10 years at 85°C. Working PrincipleThe M24C08-WMN6TP is organized into pages which is 128 Byte or 64-word blocks. The memory is organized into three arrays, the main memory array, the EEPROM array, and the security array. The M24C08-WMN6TP uses a single-supply voltage to read and write data. A write enable (WE) signal is used to enable write access to the chip. When WE is enabled, the memory address is determined by the three control pins (CE, OE, and WP/E). When OE is low, data is read from the memory. When CE is low and OE is high, data is written to the memory. In addition, the chip also has a hardware write protection (WP/E) pin that can be used to enable/disable write/erase access to the memory. The M24C08-WMN6TP also features a write protection (WP) feature, which prevents the memory from being overwritten by setting the WP pin to high. For additional security, the memory is equipped with an embedded ECC (Erase Cycle Count) module that monitors the number of erase cycles that the memory has undergone. Conclusion The M24C08-WMN6TP is a versatile EEPROM memory chip that offers a variety of features and capabilities, including a wide operating voltage range and high-reliability data retention time. It can be used in a variety of applications, including automotive, consumer, industrial, and medical applications. The chip also offers a write protection feature and an embedded ECC module for increased security.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description