M74HC590B1R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The M74HC590B1R is an 8-bit shift register used in a wide range of applications, including logic - counters, dividers, and more. Its primary benefit is its fast speed, allowing users to perform complex logic operations in a fraction of the time required by other similar devices. This article will discuss the application field and working principle of the M74HC590B1R.

Application

The M74HC590B1R can be used in applications such as logic - counters, dividers, and shift registers. By using the built-in cascade connection, a shift register can be formed using the M74HC590B1R. This allows for parallel data exchange between the register and memory. As an example, the register can be used to control a PWM signal, allowing for precise control of pulse width. The register also has useful applications for frequency dividers, allowing for accurate control of the output signal\'s frequency and/or duty cycle. Additionally, the register can be used for pulse width modulation (PWM) control, making it useful in both audio and video applications.

Working Principle

The M74HC590B1R is an 8-bit shift register with a built-in circuit that enables the serial-to-parallel transfer of data. Its cascade connection permits two or more 74HC590B1Rs to be connected in series, expanding the register to include more than 8-bits of information. The register can either be used in the serial-in serial-output (SISO) or serial-in parallel-out (SIPO) modes. Each output is active when the register\'s clock has a low-level output.

At the heart of the register, there is a 4-bit counter and 8 D-type latches. The counter is used to count the clock pulses, and the latches are used to store data. When the shift is enabled and the clock goes from HIGH to LOW, the counter is increased. Each flip-flop is clocked from the output of the previous one, indicating a shift in both directions. The input data is routed through the counter and the register simultaneously and serially.

When the output data is required, the clock is enabled and the output pins are enabled. This causes the data stored in the latches to be routed to the output pins. The register is then disabled and the output data is then routed through an AND gate to the output pins. This provides the register with an easier way to route the data to an external device.

The M74HC590B1R is a versatile shift register that can be used in many applications. It is easy to use and has fast switching speeds, making it ideal for those looking for precision control and speed in their logic applications.

The specific data is subject to PDF, and the above content is for reference