| Allicdata Part #: | MAC08BT1OSCT-ND |
| Manufacturer Part#: |
MAC08BT1 |
| Price: | $ 0.00 |
| Product Category: | Discrete Semiconductor Products |
| Manufacturer: | ON Semiconductor |
| Short Description: | TRIAC SENS GATE 200V 0.8A SOT223 |
| More Detail: | TRIAC Logic - Sensitive Gate 200V 800mA Surface Mo... |
| DataSheet: |  MAC08BT1 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
Specifications
| Series: | -- |
| Packaging: | Cut Tape (CT) |
| Part Status: | Obsolete |
| Triac Type: | Logic - Sensitive Gate |
| Voltage - Off State: | 200V |
| Current - On State (It (RMS)) (Max): | 800mA |
| Voltage - Gate Trigger (Vgt) (Max): | 2V |
| Current - Non Rep. Surge 50, 60Hz (Itsm): | 8A @ 60Hz |
| Current - Gate Trigger (Igt) (Max): | 10mA |
| Current - Hold (Ih) (Max): | 5mA |
| Configuration: | Single |
| Operating Temperature: | -40°C ~ 110°C (TJ) |
| Mounting Type: | Surface Mount |
| Package / Case: | TO-261-4, TO-261AA |
| Supplier Device Package: | SOT-223 |
| Base Part Number: | MAC08 |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Thyristors - TRIACs are a type of electronic switching device that can control and modulate two-way current flow in AC circuits. The MAC08BT1 series is a 600V, 8 Amp TRIAC that has been designed to provide the maximum degree of performance, reliability and flexibility for use in a variety of applications.
The MAC08BT1 has a zero voltage crossing turn-on, can latch current either anode or gate connected and has a wide range of gate trigger turn-on capabilities. It is also designed to have low thermal resistance and low gate power drive to make it suitable for any requirement.
The MAC08BT1 device has a broad range of applications. This can include motor and motor control applications, automation and process control, power supply and inverter applications, heating and lighting control, automotive, consumer and industrial appliance control.
The working principle of the MAC08BT1 TRIAC is based on the fact that it is a three-terminal semiconductor switch that uses a single-phase AC power source voltage for bidirectional control of current, much like two SCRs connected back to back. When an appropriate voltage is applied to the gate terminal, carriers are injected into the device and are able to create an avalanche breakdown at both junctions. This creates a conducting channel between the main terminals and the current passes through the device.
The current through the MAC08BT1 can be reversed by reversing the voltage applied to the gate, allowing it to control the current in either direction. This is done by shorting the gate daisy chain to the MT2 and MT1 terminals, allowing the current to flow through the device in a reverse direction for each half-cycle of the applied voltage.
The MAC08BT1 series is able to hold their alternative states or junction state from 200μs after the gate voltage lif-off. This allows for both anode and gate current modulation with no additional parts or external components needed.
The MAC08BT1 TRIACs offer advantages in design and operation over other types of electronic switches. They are good for applications where fast switching is required and for bidirectional current flow. They are also much better suited for full wave control applications than other switch types.
Overall, the MAC08BT1 is a useful type of TRIAC, offering a high level of performance, reliability and flexibility in a range of applications. It is easy to use, offers fast switching and has a low level of gate current drive needed to switch it on. Its ability to hold its alternative states after the gate voltage lift-off makes it useful for anode or gate current modulation.
The MAC08BT1 has a zero voltage crossing turn-on, can latch current either anode or gate connected and has a wide range of gate trigger turn-on capabilities. It is also designed to have low thermal resistance and low gate power drive to make it suitable for any requirement.
The MAC08BT1 device has a broad range of applications. This can include motor and motor control applications, automation and process control, power supply and inverter applications, heating and lighting control, automotive, consumer and industrial appliance control.
The working principle of the MAC08BT1 TRIAC is based on the fact that it is a three-terminal semiconductor switch that uses a single-phase AC power source voltage for bidirectional control of current, much like two SCRs connected back to back. When an appropriate voltage is applied to the gate terminal, carriers are injected into the device and are able to create an avalanche breakdown at both junctions. This creates a conducting channel between the main terminals and the current passes through the device.
The current through the MAC08BT1 can be reversed by reversing the voltage applied to the gate, allowing it to control the current in either direction. This is done by shorting the gate daisy chain to the MT2 and MT1 terminals, allowing the current to flow through the device in a reverse direction for each half-cycle of the applied voltage.
The MAC08BT1 series is able to hold their alternative states or junction state from 200μs after the gate voltage lif-off. This allows for both anode and gate current modulation with no additional parts or external components needed.
The MAC08BT1 TRIACs offer advantages in design and operation over other types of electronic switches. They are good for applications where fast switching is required and for bidirectional current flow. They are also much better suited for full wave control applications than other switch types.
Overall, the MAC08BT1 is a useful type of TRIAC, offering a high level of performance, reliability and flexibility in a range of applications. It is easy to use, offers fast switching and has a low level of gate current drive needed to switch it on. Its ability to hold its alternative states after the gate voltage lift-off makes it useful for anode or gate current modulation.
The specific data is subject to PDF, and the above content is for reference
Related Products
Search Part number : "MAC0" Included word is 6
| Part Number | Manufacturer | Price | Quantity | Description |
|---|
| CWS-OSK-MAC00-DV | NXP USA Inc | 4.2 $ | 1000 | SOFTWARE/SUPPORT OSEK DEV... |
| CWS-OSK-MAC00-LX | NXP USA Inc | 6.3 $ | 1000 | SOFTWARE/SUPPORT OSEK DEV... |
| MAC08BT1G | Littelfuse I... | 0.11 $ | 4000 | TRIAC SENS GATE 200V 0.8A... |
| MAC08MT1G | Littelfuse I... | -- | 1000 | TRIAC SENS GATE 600V 0.8A... |
| MAC08BT1 | ON Semicondu... | 0.0 $ | 1000 | TRIAC SENS GATE 200V 0.8A... |
| MAC08MT1 | ON Semicondu... | -- | 1000 | TRIAC SENS GATE 600V 0.8A... |
Latest Products
OT410,115
TRIAC SC73TRIAC Standard Surface Mount...
OT355,127
TRIAC SOT78TRIAC SOT78
OT380,116
TRIAC TO92-3TRIAC Standard Through Hol...
OT337,116
TRIAC TO92-3TRIAC Standard Through Hol...
BT136-600E/02,127
TRIAC SENS GATE 600V 4A TO220ABTRIAC Log...
Z00607MA,412
TRIAC SENS GATE 600V 0.8A TO92-3TRIAC Lo...