MAC97A8/DG,412

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A TRIAC is any of a trio of two-terminal semiconductor devices (thyristors) that acts as a switch in an alternating current system. The term is somewhat misleading, as TRIAC devices actually contain three gates, or layers of electronics, instead of the two found in many conventional thyristors. Simply put, a TRIAC consists of three alternating current-controlled thyristors connected in series. This configuration provides three individual gates with which to control the flow of current.

The common base type thyristor, or TRIAC, is the most widely used switching device for alternating current. The MAC97A8/DG,412 is a four-layer TRIAC with a nominal blocking voltage of 400V and a current rating of 4A.

The main application of the MAC97A8/DG,412 is in the power switching of resistive, inductive, and capacitive circuits. It can be used in domestic and commercial appliances such as electric heating elements, dimmers and solenoids. It is also used in lighting systems and motor control applications. The device has no gate current and has gate drive capabilities appropriate for driving SiGe transistors, reducing gate drive power requirements.

One important attribute of the MAC97A8/DG,412 is that it can be switched in both directions, allowing it to be used in forward and reverse power circuits. As such, it can be used in power factor correction circuits, where the extent of the control can be clearly monitored. The device is also capable of triggering and gating signals, thereby further increasing its versatility.

The working principle of the MAC97A8/DG,412 is based on the behavior of majority carriers. When a positive voltage is applied to the gate of the device, the current through the gate increases exponentially. At a certain threshold, the switch will become conducting and current will flow through the device. If the voltage on the gate falls to the opposite polarity, the device becomes non-conducting. As with all thyristors, the current through the device can only be stopped with an external circuit.

In summary, the MAC97A8/DG,412 is a four-layer TRIAC used for controlling power in AC circuits. Its unique combination of features and capabilities make it an ideal choice for applications involving resistive, inductive and capacitive switching, as well as applications requiring high voltage, low power, and gate current and pulse triggering capabilities. Its underlying principle is based on the behavior of majority carriers, which is why it can be used for both forward and reverse power circuits.

The specific data is subject to PDF, and the above content is for reference