MAL205656333E3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors represent one of the most important components in the electronic world. In general, they consist of an etched aluminum foil with embedded electrolytic anode, a cathode made of solid aluminum, as well as a separator that is soaked in an electrolytic liquid. The central element, the etched aluminum foil with embedded anode, is called the “core”. This core is separated from the aluminum cathode by a paper or plastic spacer filled with an electrolytic liquid. This construct is sealed off from the atmosphere by a bridge seal or a screw cap.

The MAL205656333E3 Aluminum Electrolytic Capacitor is a popular model, recommended for both consumer and industrial applications. It has a wide operational temperature range of -40 to +105 degrees Celsius, allowing it to be used in a variety of settings. Additionally, it has a reasonable size of diameter and height of 20.5 x 65 mm. This makes it suitable for space-constrained applications.

This capacitor’s application field mainly involves uses that require long-term stability; such as motor controls, power supplies, and audio equipment. The capacitor’s performance is also heavily dependent on the working frequency, temperature, and voltage. Therefore, it can be used in high-frequency circuits with a wide frequency range.

The MAL205656333E3 Aluminum Electrolytic Capacitor also features a high capacitance ratio of up to 1,000 times that of general ceramic capacitors (some can even reach 1,000,000:1.). This makes it ideal for high voltage applications, making it possible to maintain the same capacitance over a wide range of voltage. Additionally, it also exhibits very low ESR noise, making it suitable for low noise electronics.

The working principle of the MAL205656333E3 Aluminum Electrolytic Capacitor is based on electrochemical principles, meaning that it stores energy by use of electrical charge. When a voltage is applied to the capacitor’s two terminals, a charge will be stored on each plate and a current will flow. This current then causes a build-up of charge on both plates, which is then held in place by an electric field.

Aluminum electrolytic capacitors typically come in two forms, non-polarized and polarized. Non-polarized capacitors are those in which the plates can be connected either way without any decrease in performance, while polarized capacitors require a specific electrical orientation in order for them to work properly. Since MAL205656333E3 capacitors are polarized models, they should always be connected in the same orientation as instructed to get the best performance.

The MAL205656333E3 Aluminum Electrolytic Capacitor is a reliable and cost-effective option for a variety of applications that require long-term stability. Additionally, its large capacitance ratio and low ESR allow it to be suitable for high voltage and noise-sensitive applications. Its working principle of charging and discharging energy is also relatively straightforward. Therefore, for those seeking a dependable and versatile capacitor solution, the MAL205656333E3 can be an excellent choice.

The specific data is subject to PDF, and the above content is for reference