MAL205871332E3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are components that are widely used in analog circuits for power supplies, timers, pulses, oscillators and other circuits for signal dampling, frequency separation, pulse shaping and many other purposes. The MAL205871332E3 is a general purpose aluminum electrolytic capacitor manufactured by Sanyo and available from Mouser Electronics. It is a non-polar, axial lead, commercially available product that can facilitate efficient signal processing and help with application development.

The MAL205871332E3 is a radial-lead aluminum electrolytic capacitor with a rated capacitance of 47 microfarads and a rated voltage of 16V. It has an operating temperature range of -55 to 105 degrees Celsius, a rated capaka of 218,000 uF, and a maximum ESR of 14 mOhms. The MAL205871332E3 is rated for 10,000 hours and has been tested to withstand up to 10,000 cycles. It is made of an aluminum-based electrolyte and non-solid electrolyte. The casing is zinc-plated tin-plated steel and the leads are tin-plated copper.

The application field of the MAL205871332E3 capacitor is mainly used for applications that require high reliability, such as filters, power supplies, amplifiers, and various oscillators. It is ideal for applications which require low leakage current, low equivalent series resistance (ESR), as well as high surge endurance in short circuit. As such, the MAL205871332E3 capacitor is found in a wide area of applications such as aerospace, industrial and medical, automotive and other sectors depending on need.

The basic working principle of this aluminum electrolytic capacitor is to store energy in an electric field. This is created when there is a potential difference between two conducting plates separated by a dielectric material, which is typically an electrolyte. When a voltage is applied across the two plates, the positive plate will become charged, and the negative plate will become discharged. The electric field that is created will store energy from the voltage source until it reaches its peak, and then will gradually start to decrease. The amount of stored energy is determined by the capacitance of the capacitor.

The MAL205871332E3 aluminum electrolytic capacitor has a capacitance of 47 microfarads and a voltage of 16V, making it suitable for most commercial applications. It is highly reliable and its low leakage current and low ESR makes it an ideal choice for high-end applications. It is also economical and is cost-effective for any application. The MAL205871332E3 aluminum electrolytic capacitor can be used in many different applications to provide efficient signal processing and help with application development.

The specific data is subject to PDF, and the above content is for reference