MAL209527102E3

Polarization:	Polar
Package / Case:	Radial, Can - Snap-In - 5 Lead
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	3.937" (100.00mm)
Size / Dimension:	1.575" Dia (40.00mm)
Lead Spacing:	0.886" (22.50mm)
Impedance:	57 mOhms
Ripple Current @ Low Frequency:	6A @ 100Hz
Applications:	General Purpose
Ratings:	--
Series:	095 PLL-4TSI
Operating Temperature:	-40°C ~ 85°C
Lifetime @ Temp.:	10000 Hrs @ 85°C
ESR (Equivalent Series Resistance):	99 mOhm @ 100Hz
Voltage - Rated:	450V
Tolerance:	±20%
Capacitance:	1000µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Box (TB)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic CapacitorsAluminum electrolytic capacitors are one of the most commonly used components in electronics today. They are a reliable and inexpensive choice for many applications. These capacitors use two aluminum foils separated by paper or plastic to form a conductor. The two foils are then coated with an electrolyte. This creates a layer of dielectric between the two foils, which allows the capacitance to be adjusted.The MAL209527102E3 is an aluminum electrolytic capacitor. It is designed for use in electronic applications such as power supplies and DC motors. The capacitor has a maximum operating temperature of 105 C, and can handle a maximum ripple current of 50mA. The ESR (Equivalent Series Resistance) of this capacitor is 0.2 ohm. The MAL209527102E3 has a capacitance of 1000 uF, and a voltage rating of 450V. The working principle of the MAL209527102E3 is fairly straightforward. When a voltage is applied across the capacitor, the two aluminum foils act as two opposing plates, and electrons begin to move between them. As this movement increases, the electrical energy that is produced causes the electrolyte solution between the two plates to become more conductive, increasing the capacitance. This phenomenon is known as the piezo effect. The MAL209527102E3 is typically used in applications that require a large amount of capacitance, such as power supplies and DC motors. The capacitor is often used in power supply circuits, as it can provide more than enough capacitance to filter out any AC ripple that is present in the input voltage. It is also commonly used in DC motor circuits, as it can provide the amount of capacitance needed to start the motor and help it run smoothly.In summary, the MAL209527102E3 is an aluminum electrolytic capacitor with a capacitance of 1000 uF and a voltage rating of 450V. It has an ESR of 0.2 ohm and a maximum operating temperature of 105 C. The capacitor is primarily used in applications that require a large amount of capacitance, such as power supplies and DC motors. Its working principle is based on the piezo effect, where the increased electrical movement between the two aluminum foils increases the conductivity of the electrolyte solution and leads to an increase in the capacitance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description