MAL210263222E3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors (AECs) are the most common type of capacitor used in electrical and electronic applications. They are widely used in a variety of applications like power supplies, oscillators, signal noise reduction, filter circuits, and high-frequency applications. The main characteristic of AECs is their ability to store a large amount of electrical energy, thereby providing good filtering and signal conditioning for a variety of different applications.

MAL210263222E3 is a type of AEC designed to provide superior service life and performance in high-end applications. It features a large capacitance-to-volume ratio and very low ESR and ESL. The MAL210263222E3\'s casing is made of aluminum and has a six-terminal configuration for increased reliability during long-term operation. The capacitance values of the MAL210263222E3 range from 3300uF to 7000uF at 25V to 450V and working temperatures range from -40 degrees Celsius to +85 degrees Celsius.

The MAL210263222E3 is typically used in automotive, industrial and medical applications. Its applications include power supply filters, voltage regulators, noise suppression, decoupling, and smoothing filters. It is ideal for high-end applications as it provides a low-resistance power supply, smooth voltage transition, reduced noise and improved performance, and enhanced EMI/RFI noise protection.

The MAL210263222E3 works on the principle of Faraday’s law of electrolysis. This principle states that the current between two electrodes, one of which is an electrolyte, is proportional to the difference in potential between them. In this capacitor, the anode is an aluminum foil used as a current collector while the electrolyte is an electrolytic solution. The aluminum foil serves as a dielectric layer to separate the anode and cathode. The two metal plates are separated by an electrolytic solution, which allows current to flow between the two plates.

When a voltage is applied across the two plates, electrons will flow from the anode to the cathode, as this is the path of least resistance. This electrical current will cause the anode to dissolve into the electrolyte solution, forming a thin layer of oxide on the surface of the anode. The oxide layer acts as an insulating barrier and prevents current from flowing across the surfaces of the anode and cathode. This ability to store energy is what makes Aluminum Electrolytic Capacitors so desirable for many applications.

The specific data is subject to PDF, and the above content is for reference