MAL211945472E3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are electrical components which use an aluminum electrolytic anode in order to store a charge. They are composed of two parts, a positively charged anode (cathode) and a negatively charged dielectric material (anode). The cathode is typically made of aluminum foil, while the anode is made of a metal oxide or an electrolyte. The anode and cathode are separated by an electrolyte, which allows for the passage of electrical current in order to charge or discharge the capacitor. The capacitance of an aluminum electrolytic capacitor is typically measured in Farads.The MAL211945472E3 aluminum electrolytic capacitor is a cylindrical capacitor with a diameter of 25 millimeters and a height of 45 millimeters. It has a capacitance of 10.2 mF and operating voltage of 25V. The capacitor has a rated ripple current of 17℃, 3600mA, a rated surge voltage of 160V, an operating temperature range of -25°C to 85°C, and a tolerance of ±20%. The capacitor has a snap-in connector and an acceptable depression of 5mm.The MAL211945472E3 aluminum electrolytic capacitor has a variety of applications in both industrial and consumer-level products. The capacitor is designed primarily for filtering applications, such as the suppression of EMI and RFI noise. It can also be used in other types of circuits such as power supplies, voltage regulators, and signal processing circuits. In addition, it is also used in the high-end audio and video products such as amplifiers, receivers, and stereos.The working principle behind the MAL211945472E3 aluminum electrolytic capacitor is the same as with all other capacitor types. It consists of two layers of thin aluminum foil which are separated by an electrolyte solution. The anode is positively charged, while the cathode is negatively charged. When an external voltage is applied across the capacitor, a reaction occurs between the electrolyte and aluminum foils, allowing for the charge to build up as current is conducted through the capacitor. This build up of charge creates a potential difference between the plates, which in turn store electrical energy. The capacitance of the capacitor is determined by the surface area of the plates and the distance between them, as well as the magnitude of the applied voltage. As the voltage is increased, the capacitance of the capacitor increases until it reaches its maximum value.

The specific data is subject to PDF, and the above content is for reference