MAL212324681

Polarization:	Polar
Package / Case:	Axial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	--
Size / Dimension:	0.508" Dia x 1.260" L (12.90mm x 32.00mm)
Lead Spacing:	--
Impedance:	200 mOhms
Ripple Current @ Low Frequency:	760mA @ 100Hz
Applications:	General Purpose
Ratings:	--
Series:	123 SAL-A
Operating Temperature:	-55°C ~ 125°C
Lifetime @ Temp.:	20000 Hrs @ 125°C
ESR (Equivalent Series Resistance):	550 mOhm @ 100Hz
Voltage - Rated:	10V
Tolerance:	±20%
Capacitance:	680µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Obsolete
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are capacitors in which electrolysis is used to store charge on aluminum plates. They are frequently used in most electrical and electronics circuits due to their small size, relatively low cost, wide range of voltage and capacitance values, low equivalent series resistance (ESR), and long-term reliability.

MAL212324681 Application Field and Working Principle

The MAL212324681 is an aluminum electrolytic capacitor with a high capacitance rating of 1000μF, a voltage rating of 35V, and a size of 10mm x 16 mm. This means it can store a relatively high amount of charge with a moderate voltage, in a small amount of space. Because of its small size, high capacitance, and low cost, it is often used in applications where circuit board space is limited and high capacitance is desired. The MAL212324681, like any other aluminum electrolytic capacitor, stores charge using aluminum plates separated by an electrolytic material. The aluminum plates act as anodes, while the electrolyte acts as the cathode. When voltage is applied to the capacitor, electrolysis takes place, and a thin layer of oxide forms on the surface of the aluminum plates. This oxide layer helps to insulate the capacitor and increases its overall capacitance. The voltage rating is limited by the breakdown strength of the oxide layer. When the voltage across the capacitor exceeds the oxide layer\'s breakdown strength, current will start to pass through it, leading to possible failure.

Conclusion

The MAL212324681 is an aluminum electrolytic capacitor with a high capacitance rating of 1000μF, a voltage rating of 35V, and a small size of 10mm x 16 mm. Due to its small size and high capacitance, it is often used in applications where board space is limited and high capacitance is desired. Like other aluminum electrolytic capacitors, it stores charge using aluminum plates separated by an electrolytic material. The oxide layer that forms on the surface of the aluminum plates increases the capacitance and limits the voltage rating of the capacitor.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description