MAL212384681

Polarization:	Polar
Package / Case:	Axial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	--
Size / Dimension:	0.508" Dia x 1.260" L (12.90mm x 32.00mm)
Lead Spacing:	--
Impedance:	200 mOhms
Ripple Current @ Low Frequency:	760mA @ 100Hz
Applications:	General Purpose
Ratings:	--
Series:	123 SAL-A
Operating Temperature:	-55°C ~ 125°C
Lifetime @ Temp.:	20000 Hrs @ 125°C
ESR (Equivalent Series Resistance):	550 mOhm @ 100Hz
Voltage - Rated:	10V
Tolerance:	±20%
Capacitance:	680µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Obsolete
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Box (TB)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors - MAL212384681 Application Field and Working Principle

Aluminum electrolytic capacitors (or “aluminum electros”) were created to fill the gap between the relatively low-value film capacitors and the much higher-value ceramic capacitors. They have found considerable use in a variety of applications, such as consumer electronics, automotive, communications, and medical equipment.

What are Aluminum Electrolytic Capacitors?

An aluminum electrolytic capacitor is a type of electrolytic capacitor consisting of an anode made from a high-purity aluminum foil, an electrolyte, and a cathode made from a material such as carbon or stainless steel. The electrolyte is typically an electrolyte that is a solid or an aqueous solution. It is capable of storing large amounts of electric charge and transferring energy over a wide range of temperatures and under a variety of operating conditions.

MAL212384681 Application Field

Aluminum electrolytic capacitors are used in a variety of applications, such as consumer electronics, automotive, communications, and medical equipment. MAL212384681 is a type of capacitor used in consumer multimedia equipment applications, such as flat TVs, cell phones, and computers. It is also used in audio equipment for radio and car audio applications, as well as in projector and surveillance equipment.

MAL212384681 Working Principle

The working principle of a MAL212384681 aluminum electrolytic capacitor is based on the electrolyte acting as a resistive barrier between the two components—the aluminum plate (anode) and the carbon or stainless steel plate (cathode). This barrier creates a built-in electric potential or voltage between them. When a voltage is applied to this assemblage, the anode plate loses its positive charges, which are absorbed by the electrolyte, as well as the cathode plate. The positive charges accumulate on the plates and the corresponding electrons are pulled off by the electrolyte. The accumulated charge on the plates creates a strong electrostatic field, which is responsible for the capacitance of the aluminum electrolytic capacitor. The current that passes between the anode and the cathode is proportional to the applied voltage. The charge on the anode plate determines the dielectric breakdown strength of the capacitor. As the charge on the anode plate increases, the resistance of the electrolyte barrier increases, and therefore, the capacitance values decrease.

Conclusion

Aluminum electrolytic capacitors are widely used in a variety of applications, such as consumer electronics, automotive, communications, and medical equipment. MAL212384681 aluminum electrolytic capacitors are typically used in consumer multimedia applications, such as flat TVs, cell phones, and computers. The working principle of MAL212384681 is based on the electrolyte acting as a resistive barrier between the anode and cathode plates, which creates a built-in electric potential or voltage between them. This strong electrostatic field is responsible for the capacitance of the aluminum electrolytic capacitor.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description