MAL213638221E3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are one of the commonly used capacitors in the electrical industry and they are mainly used to store and release electrical energy. MAL213638221E3 is an example of an aluminum electrolytic capacitor that offers high capacitance values in the range of 1µF to 3µF, and a very small size of 2.3mm×4.0mm. The MAL213638221E3 is a type of polarized electrolytic capacitor, which means it can only be connected in one direction and the correct orientation must be verified before installation.

An aluminum electrolytic capacitor consists of two aluminum electrodes separated by a separator, which is a thin layer of dielectric material (usually an oxide film). It also contains a liquid or a gel electrolyte, which acts both as an electrical conductor as well as an ionization agent. This electrolyte impregnates the porous separator and further provides an electric field between the two electrodes. The MAL213638221E3 also contains a cathode tag, which is connected to the negative lead of the capacitor and a series of anode tabs connected to the positive lead. The two terminals are connected to the positive and the negative ends of the dielectric, thus forming the junction.

The MAL213638221E3 is designed for low frequency, low voltage applications in which a small size and a high electrical capacity are important factors. These applications include telecommunications, automotive systems, consumer electronics, signal suppression and power supplies. The electrical capacity is between 1µF and 3µF, which is sufficient for most of these applications. Its temperature range is from -50 °C to 85 °C and its lifespans are anywhere from 1000 to 4000 hours, depending on the operating conditions. Some of its other features include high ripple current, small size, low impedance, and low ESR (Equivalent Series Resistance).

The MAL213638221E3 works by using an electrochemical process in order to store and release electrical energy. The circuit is closed through the electrolyte, which is an ionized liquid or gel that provides a conducting path. Electricity flows through this conducting path, where charges accumulate and create an electrical potential at the two end terminals of the capacitor. When a voltage is applied to the terminals, it polarizes the capacitor and charges accumulate on each of the plates. This creates an electric field that can store electrons for further use. When the circuit is open, the stored charge is slowly released back into the circuit.

In summary, the MAL213638221E3 is an aluminum electrolytic capacitor that is designed for use in low voltage, low frequency applications. It provides a capacitance of 1µF to 3µF, a temperature range of -50°C to 85°C and a lifespan of 1000-4000 hours. It also has features such as low impedance, high ripple current, small size and low ESR (Equivalent Series Resistance). It works by polarizing the capacitor when a voltage is applied, creating an electric field that stores electrons for later use. When the circuit is open, these charges are slowly released back into the circuit.

The specific data is subject to PDF, and the above content is for reference