MAL214661102E3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are the most prevalent type of capacitors in use today. The MAL214661102E3 is one such capacitor, characterized by its large surface area and efficient yet low leakage storage. This makes the MAL214661102E3 an ideal choice for use in a variety of applications.

Applications

The MAL214661102E3 is capable of very high capacitance, making it perfect for use in power-related applications. Its large surface area and low leakage storage capacity give it a distinct advantage over other capacitors in terms of energy storage. This makes the MAL214661102E3 ideal for use in power supplies, power converters, and voltage regulating systems. Additionally, the MAL214661102E3 can also be used in dc/ac inverter circuits, to help regulate voltage fluctuations and to provide additional power storage.

The MAL214661102E3 also has excellent filtering capabilities, making it suitable for use in signal filtering applications. Its ability to maintain a steady capacitance even over varying frequency ranges makes it ideal for use in audio circuits, where frequency range and signal fidelity are both of paramount importance. Additionally, the MAL214661102E3 can also be used in radio frequency (RF) circuits to help filter out unwanted noise and interference.

Working Principle

The MAL214661102E3 is an aluminium electrolytic capacitor consisting of two aluminum electrodes separated by a dielectric material. These two electrodes are then soaked in an electrolyte, usually aqueous. When an electric potential is applied across the electrodes, electrons migrate through the dielectric and form a layer of deposited electrons on the electrode surfaces. This creates a capacitance.

The operating principle of an aluminium electrolytic capacitor can be broken down into three major stages - charging, discharging and leakage. When a voltage is initially applied across the electrodes, the electrons from the positive electrode will migrate into the negative electrode and build up a capacitance. This process is known as charging. Once the capacitor is ‘fully charged’, electrons will then start flowing back into the positive electrode. This is known as discharging, and is the process of producing the output voltage.

The third stage, leakage, is the result of electrons slowly leaking away from the capacitance. This leakage is often associated with the electrolyte’s resistance. As this resistance increases, the capacitance leakage increases as well. In aluminum electrolytic capacitors, this leakage is minimized by etching the electrode surfaces to increase the surface area. This etching process, combined with the use of aqueous electrolytes, helps to create a high-performance capacitor.

The MAL214661102E3 is an aluminum electrolytic capacitor which combines the excellent properties of the electrolytic thin film capacitor with the depositing and etching properties of the aluminum electrolytic. This combination makes the MAL214661102E3 an ideal capacitor for use in a variety of applications, from power regulation to signal filtering.

The specific data is subject to PDF, and the above content is for reference