MAL214699511E3

Polarization:	Polar
Package / Case:	Radial, Can - SMD
Mounting Type:	Surface Mount
Surface Mount Land Size:	0.709" L x 0.709" W (18.00mm x 18.00mm)
Height - Seated (Max):	0.827" (21.00mm)
Size / Dimension:	0.709" Dia (18.00mm)
Lead Spacing:	--
Impedance:	35 mOhms
Ripple Current @ High Frequency:	1.75A @ 100kHz
Applications:	Automotive
Ratings:	AEC-Q200
Series:	146 CTI
Operating Temperature:	-55°C ~ 125°C
Lifetime @ Temp.:	6000 Hrs @ 125°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	16V
Tolerance:	±20%
Capacitance:	4700µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to MAL214699511E3

MAL214699511E3 is a type of aluminum electrolytic capacitor produced by TDK. This component has a wide range of applications from automotive to computer and communications, and is designed to offer reliable performance in electronic circuits.

What is an Aluminum Electrolytic Capacitor?

An aluminum electrolytic capacitor (also commonly known as an electric double-layer capacitor) is a type of capacitor that utilizes two electrically conductive materials separated by a thin layer of insulator called a dielectric. The capacitor’s structure is slightly different from traditional capacitors, and allows it to offer much higher capacitance density than conventional models.

Advantages of Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors offer many advantages over other types of capacitors. One of the biggest advantages is that they offer a much higher capacitance for a given size than other types of capacitors. This means that an aluminum electrolytic capacitor can be much smaller for the same amount of capacitance than other types.In addition, aluminum electrolytic capacitors have very low leakage current, meaning that they can store electrical charge for extended periods of time without significant degradation. They also have relatively low ESR (equivalent series resistance) values, allowing for higher currents in switching applications. Other advantages include high temperature stability and low inductance, making them suitable for high frequency applications.

Limitations of Aluminum Electrolytic Capacitors

Although aluminum electrolytic capacitors offer many advantages, they also have some limitations. The most significant limitation is their relatively low voltage rating. They are limited to lower voltage applications than many other types of capacitors.Additionally, they are quite sensitive to extreme temperatures, and careful consideration must be made when using them in these environments. They can also be sensitive to temperature shifts, and gradual self-discharge.

Applications for MAL214699511E3

MAL214699511E3 capacitors are designed to offer enhanced performance in a variety of applications. Due to their relatively high capacitance, high temperature stability, and wide operating temperature range, they are suitable for a wide range of industrial, automotive, and consumer electronics applications. They can be used in automotive applications such as DC motors, alternators, and fuel pumps, as well as medical devices, computers and communication equipment, consumer electronics, renewable energy systems, and power supplies.

Working Principle of MAL214699511E3

The working principle of MAL214699511E3 is based on the formation of two electrical layers within the capacitor. The anode is formed from an aluminum oxide layer, while the cathode is formed from a conductive electrolyte solution. These layers create a parallel-plate capacitor, with the electric field created by the layers concentrated between them. As a voltage is applied to the capacitor, the electrostatic attraction between the two layers creates an electric flow, allowing the capacitor to store charge and releasing it when the voltage is removed. This process creates an alternating voltage output, providing the electrical energy needed to power the circuit.

Conclusion

MAL214699511E3 is a type of aluminum electrolytic capacitor produced by TDK. This component has a wide range of applications from automotive to computer and communications, and is designed to offer reliable performance in electronic circuits. The working principle of MAL214699511E3 is based on the formation of two electrical layers within the capacitor, with the electric field created by the layers concentrated between them. As a voltage is applied to the capacitor, the electrostatic attraction between the two layers creates an electric flow, allowing the capacitor to store charge and releasing it when the voltage is removed. This process creates an alternating voltage output, providing the electrical energy needed to power the circuit.Aluminum electrolytic capacitors offer many advantages over other types of capacitors, such as a much higher capacitance for a given size, very low leakage current, low ESR values, high temperature stability, and low inductance. However, they also have some limitations, as they are limited to lower voltage applications and can be sensitive to extreme temperatures and temperature shifts.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description