MAL214831471E3

Series:	148 RUS
Packaging:	Tape & Box (TB)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	470µF
Tolerance:	±20%
Voltage - Rated:	50V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	2000 Hrs @ 105°C
Operating Temperature:	-40°C ~ 105°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	530mA @ 100Hz
Impedance:	140 mOhms
Lead Spacing:	0.197" (5.00mm)
Size / Dimension:	0.394" Dia (10.00mm)
Height - Seated (Max):	0.866" (22.00mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Aluminum Electrolytic CapacitorsAluminum electrolytic capacitors are components widely used in modern electronic devices and electric circuits. The technology was invented in the early 20th century and has undergone several changes over the decades. These components are typically used for power supply filtering, signal timing, and other applications in circuit designs. The aluminum electrolytic capacitors are divided into two main types – polar (or polarized) and non-polar (or non-polarized) capacitors. The differences between the two are mainly based on the directions of the voltage polarization current applied to the capacitor.MAL214831471E3 Application Field and Working PrincipleThe MAL214831471E3 aluminum electrolytic capacitor is a non-polarized capacitor with a capacitance of 470 uF and a ratedvoltage of 16V. It is primarily used in power supply filtering, signal timing, and other circuit designs. This capacitor is designed to be used in a wide variety of applications including solar energy systems, LED lighting, automotive systems, and communication systems.The working principle of this aluminum electrolytic capacitor is based on the Faraday law of electrolysis. This law states that when a voltage difference is applied across the anode and cathode of an electrolytic cell, a current of electric charge passes through the cell. This current is proportional to the voltage applied and the ionic conductivity of the electrolyte. In the case of an aluminum electrolytic capacitor, the electrolyte is a liquid or solid-state type, as well as the anode and cathode being made of aluminum.When the capacitor is charged, current fluxes into the anode and forces electrons to flow from the anode to the cathode. This current flux causes an accumulation of negative charge on the anode and a positive charge on the cathode. This charge is stored in the form of an electric field within the capacitor. When the power supply voltage is applied across the capacitor, the current flow is large enough to cause the capacitor to start drawing power from the supply.In addition to the Faraday law of electrolysis, this aluminum electrolytic capacitor has also been designed to reduce the self-inductance of the component and thus providing a higher charging speed and betterefficiency. The capacitance of this component is also relatively high, making it suitable for high frequency applications.ConclusionThe MAL214831471E3 aluminum electrolytic capacitors are versatile components that are widely used in a variety of electronic circuits and devices. This capacitor is primarily used for power supply filtration, signal timing, and other applications. The working principle of the component is based on the Faraday law of electrolysis and it has been designed to reduce the self-inductance and provide improved charging speed and efficiency.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description