MAL215736181E3

Polarization:	Polar
Package / Case:	Radial, Can - Snap-In
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	1.457" (37.00mm)
Size / Dimension:	0.984" Dia (25.00mm)
Lead Spacing:	0.394" (10.00mm)
Impedance:	725 mOhms
Ripple Current @ Low Frequency:	1.35A @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	157 PUM-SI
Operating Temperature:	-25°C ~ 85°C
Lifetime @ Temp.:	5000 Hrs @ 85°C
ESR (Equivalent Series Resistance):	1.26 Ohm @ 100Hz
Voltage - Rated:	400V
Tolerance:	±20%
Capacitance:	180µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors: MAL215736181E3 Application Field and Working Principle

Aluminum electrolytic capacitors are widely used in many electronics, especially those needing high power or high current supplies. Luckily, they are also relatively low cost compared to other types of capacitors, which makes them attractive for use in mass production items such as TVs, cell phones, and other gadgets.The MAL215736181E3 is a type of aluminum electrolytic capacitor that is designed to be used in high frequency switching power supplies and converters. This type of capacitor has a greater capacitance than other similar models, meaning it can hold more electrical charge, which makes it useful for applications that require a large amount of current or energy quickly.In order to understand how aluminum electrolytic capacitors work and what makes them so useful, we must first take a look at how they are made. Unlike traditional capacitors, aluminum electrolytic capacitors are made up of three different layers. The top and bottom layers are aluminum foils, which are then separated by electrolyte material, which is usually an organic solvent-based liquid.When these three layers are sandwiched together, a very thin layer of oxide forms on the surface of the aluminum foils. This layer of oxide is incredibly important, as it acts as an insulator and prevents the capacitor from shorting out. In addition, the oxide layer also increases the surface area of the capacitor, which gives it its high capacitance value.The most important property of an aluminum electrolytic capacitor is its ability to store energy. When voltage is applied to the capacitor, electrons are drawn to either of the aluminum foils, and this causes a positive charge to form on one side and a negative charge to form on the other. This charge is stored in the capacitor until the voltage is removed, at which point the charges return to their original positions and the capacitor is ready to be charged again.Thanks to the high capacitance and low cost of aluminum electrolytic capacitors, they are very common components in modern electronics. For example, in TVs and other electronic devices, they are often used as energy storage elements in the power supply, allowing the supply to provide high current or power output quickly without suffering from voltage spikes. In addition, they are also commonly used in the output filter stages of audio amplifiers, where they are used to reduce noise and interference in the audio signal.Overall, the MAL215736181E3 is a type of aluminum electrolytic capacitor that is specifically designed for high frequency switching power supplies and converters. It is made up of an anode foil, cathode foil, and electrolyte material, and its high capacitance value makes it useful for applications that require large amounts of energy or current quickly. Thanks to its low cost and high performance, it is found in a wide variety of electronics, from TVs and cell phones to audio amplifiers, allowing them to run more efficiently and reliably.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description