MAX1202EVL11-DIP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Evaluation Boards – Analog to Digital Converters (ADCs) are electrical components used to convert a signal from analog form to digital form. One of the most popular evaluation boards is the MAX1202EVL11-DIP, which is used for IoT and home automation applications.

The MAX1202EVL11-DIP features three operating modes: single-shot, continuous, and serial interface. In single-shot mode, the ADC takes a single reading on demand. In continuous mode, the ADC takes multiple readings in a burst as determined by the set trigger rate. In serial mode, the ADC operates continuously and sends the data over a simplex SPI interface. The MAX1202EVL11-DIP is a 12-bit ADC with 74 dB SINAD (Signal-to-Noise and Distortion) performance, making it ideal for applications that require a high signal-to-noise ratio. It is also capable of up to 200 ksps sampling rate.

The MAX1202EVL11-DIP is powered by a single 3.3 V supply. It is easy to use and requires no external components, as it has an on-board voltage reference, clock input, two programmable gain amplifiers, and an optional segment comparator. It also features an on-chip 2.048 V voltage reference that can be used as a reference voltage for all three operating modes.

The MAX1202EVL11-DIP is a low power device, with a power consumption as low as 12 mW when using the single-shot mode and as high as 85 mW in the continuous mode. This makes it ideal for battery operated applications. The device also has an integrated self-calibration feature which helps to ensure high accuracy and low spurs.

The working principle of the MAX1202EVL11-DIP is relatively simple. In single-shot mode, the ADC takes a single reading when the trigger pins are activated. The ADC measures an analog input signal and converts it into a digital number. The output of the ADC is then forwarded to the processor. In continuous mode, the ADC continuously samples the analog signal based on the set trigger rate and sends the data to the processor. Lastly, in serial mode, the ADC samples the analog signal continuously and sends the data to the processor over the SPI interface.

The MAX1202EVL11-DIP is ideal for a variety of applications, such as energy metering, security systems, and motor control. It can be used in industrial and consumer applications, and is particularly well-suited for IoT and smart home applications. It is easy to use, with no external components needed, and is a low power device with an integrated self-calibration feature.

The specific data is subject to PDF, and the above content is for reference