MAX13051ASA+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX13051ASA+T is a boundary-scan, fail-safe, transceiver IC consisting of two parts: a driver (MAX13051A) and a receiver (MAX13051T). It is designed to interface between 2.5V and 3.3V logic systems. The device claims high-speed operation with up to 225 Mbps data rate, extremely low level of power dissipation, and minimal skew between its driver and receiver channels. Together, this makes the chip ideal for high-speed data communication applications, such as synchronous optical networks, high-speed bus bridges, and in-flight data connections.

The chip contains two separate IO blocks, one driver and one receiver. The driver section has three outputs, driven by a differential pair of complementary signals (TX+ and TX-). The output signals have a polarity which is programmable by the use of two bits in the control register. This allows flexibility to the designer, since the signals can be set to toggle between +Vcc and ground or between +Vcc and -Vcc, depending on the application.

The receiver part of the chip consists of two inputs (RX+ and RX-). These inputs accept differential pairs of signals that are then amplified and compared against a reference voltage within the chip. If the input is a logic high or low, the output is pulled either high or low, or left in a static high-impedance state. Additionally, the chip contains two fail-safe outputs that simulate the output of a decoupled driver when power is not applied to the chip.

In terms of operation, the MAX13051ASA+T is designed to transmit data from one side of a logic system to another on a fixed frequency basis. The driver section is used to send out data bits one at a time on a given period. The receiver then obtains the data and compares them against the reference voltage. The output is pulled either high or low depending on the Received data. The fail-safe gate is then used to provide an output when power is not applied to the chip as a safety precaution.

Overall, the MAX13051ASA+T provides a simple and reliable solution for high-speed data communication applications. Its high-speed operation, low power consumption, and high immunity to noise make it an ideal choice for a variety of applications, from board-level interfaces to long-range networks.

The specific data is subject to PDF, and the above content is for reference