MAX13235EETP+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX13235EETP+ is a low-power differential line driver/receiver providing full-duplex communications. The device features a low-power CMOS output with up to 4Mbps data rate and a 1.8V to 5.5V operating range. The device includes a differential line driver and a differential line receiver with adjustable switching thresholds and uses an on-chip differential amplifier for improved edge rates. The device includes integrated detection for cable faults and allows for hot-plugging when used with the MAX14325A, a single-ended line transceiver.

MAX13235EETP+ Application Field and Working PrincipleThe MAX13235EETP+ is ideally suited to use in a variety of applications that involve full-duplex digital communications, such as data acquisition systems, instrumentation, consumer audio, consumer video, and digital audio/video transmissions. It is also used in digital systems where improved EMC and signal integrity are required, such as automotive systems, test and measurement instruments, and telecom line cards.

The MAX13235EETP+ works by taking in a differential input signal, which is then amplified by the differential line receiver. This amplified signal is sent to an adjustable active hysteresis receiver, which has independent switching thresholds for high and low levels. The receiver is designed to reject any signals outside a predetermined voltage range. The receiver\'s output can be either a high or a low logic state, depending on the incoming logic level. This logic level is sent to the output driver, which drives a differential output signal on two pins.

The receiver\'s active hysteresis has two adjustable switching thresholds, allowing the user to adjust the trip point of the receiver, and the associated noise immunity. The trip point of the receiver is controlled by adjusting the value of the external resistor, while the receiver noise margin is determined by the ratio of the external resistors connected to the hysteresis pins. With these features, the receiver can be adapted to meet the requirements of different system environments.

The line driver also includes active hysteresis with two adjustable switching thresholds, allowing the user to adjust the edge rates of the output signal. The threshold voltage of the driver is determined by the ratio of the external resistors connected to the hysteresis pins. The hysteresis can also be user-programmed for enhanced noise immunity.

The MAX13235EETP+ includes a unique feature called “Hot-Plug Detect”, which allows it to automatically power-on and power-off the device when used in combination with the MAX14325A device. This feature eliminates the need for a manual power switch in applications where Hot-Plug Detect is required.

The MAX13235EETP+ is designed to provide low power consumption and excellent EMC performance. The device is designed to meet the latest EMC requirements, including the CISPR25 EMC standard. The device is also designed to operate on low-voltage and low-power supplies, making it ideal for use in systems with limited power resources.

In summary, the MAX13235EETP+ is a low-power differential line driver/receiver providing full-duplex communications with improved EMC performance, low power consumption, and adjustable hysteresis. The device includes Hot-Plug Detect for powering up the device without manual intervention, and allows for improved system performance in a variety of applications requiring high-speed digital communications.

The specific data is subject to PDF, and the above content is for reference