MAX1483EUA+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX1483EUA+ family of transceivers is widely used in a variety of applications ranging from industrial and automotive to a wide array of consumer electronics. The device provides a low-cost solution for differential RS-485 or RS-422 communication systems. This family of devices provides a selection of sub-family options to help reduce design effort and cost.

In its simplest form the MAX1483EUA+ is a driver-receiver that consists of a differential driver, a differential receiver, a twisted-pair transceiver, transceiver enable pins, and a transceiver power-down pin. The MAX1483EUA+ also allows for the option of an external power amplifier (PA) for driver applications that require a greater output power drive capability. In these cases, up to four tri-state drivers can be employed to drive up to four nodes. Some sub-families of the MAX1483EUA+ also offer integrated data rate selection control.

The MAX1483EUA+ family is available in both a standard and extended temperature range. A wide supply voltage range of 12 V to 60 V is also supported. To meet the needs of many applications, the MAX1483EUA+ offers several versions with enhanced EMI/EMC immunity levels.

The MAX1483EUA+ family\'s drivers and receivers are designed to comply with the electrical signaling requirements of the ANSI/TIA-485 and the EIA-485A specifications. The drivers operate over a supply voltage range of 12 V to 60 V and are capable of driving signals up to levels specified by either the ANSI/TIA-485 or the EIA-485A specifications. The receivers are designed for a wide operating supply range and have a very low input bias current.

The twist-pair transceiver is designed to support a variety of twisted-pair cables. The transceiver is designed to detect whether the pair is in-use or in the idle condition. In-use detection is provided by means of an independent receiver, which monitors changes to the bus lines. The transceiver also supports parallel-to-serial data conversion, and allows for up to four nodes to be addressed simultaneously.

The integrated data rate selection control is provided on some versions of the MAX1483EUA+. This feature allows the user to switch between two transmit speeds—125 kbit/s and 250 kbit/s—without the need for additional components. This feature is particularly useful in applications where the data rate must be changed frequently, or in applications where the data rate must be adjusted depending on the signal strength from the connected nodes.

Overall, the MAX1483EUA+ provides a low-cost and highly integrated solution for differential RS-485 or RS-422 communication systems. The transceiver is easy to configure and provides flexibility in terms of the data rate selection, EMI/EMC immunity levels, and the optional external power amplifier. It is an ideal solution for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference