MAX14858GWE+

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Transceiver
Protocol:	RS422, RS485
Number of Drivers/Receivers:	1/1
Duplex:	Full
Receiver Hysteresis:	20mV
Data Rate:	25Mbps
Voltage - Supply:	1.71 V ~ 5.5 V
Operating Temperature:	-40°C ~ 105°C
Mounting Type:	Surface Mount
Package / Case:	16-SOIC (0.295", 7.50mm Width)
Supplier Device Package:	16-SOIC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX14858GWE+ is a high-speed 3.125 Gbits/sec transceiver integrated circuit designed for driving and receiving high-frequency signals. It utilizes a dual-column architecture to provide simultaneous output and input on the same channel. It has a low skew mode switchable receiver output, which accommodates any skew between source and receiver, and an external adjustable swing limiter. The input range is from -0.7V to +0.7V, while the output range is 16 mV full scale. The device is constructed using advanced CMOS process technology, has a wide supply voltage range (2.5V to 3.6V) and is capable of interfacing with nearly any logic family. It also has built in ESD protection and is RoHS compliant. MAX14858GWE+ is ideal for applications requiring high-speed serial data transmission, such as high-speed hard drives, servers, and storage systems. It has integrated termination resistors and supports multiple input/output control signals such as chip select, write enable, read enable, and sleep mode. The data rate for this device is 3.125 Gbits/sec with low skew mode, and 6.25 Gbits/sec with a high skew mode. The device features several features which simplify system-level design. These features include: single receiver enable, integrated termination resistors, low input and output capacitance, low output-to-output skew, adjustable output swing limiter, programmable output voltage range, and optional internal DC offset trimming. At the system level, the MAX14858GWE+ provides two power supply connections, one for the supply voltage and one for the ground. Each of these pins is then connected to the corresponding pads on the PCB. The MAX14858GWE+ can receive a single supply voltage ranging from 2.5V to 3.6V. An optional external Vcc-LIM pin allows for the adjustment of the voltage range to make sure that the output voltage is within the limits. The transceiver includes a unique low skew mode receiver output, which allows the two devices that are coupled together to be driven by the same clock without additional delays or skews. This makes it ideal for applications that require high-speed data transmission, such as high speed hard drives and storage systems. The MAX14858GWE+ is capable of operating with a large number of logic families, including TTL, CMOS and BiCMOS. It also supports multiple input/output control signals, such as chip select, write enable, read enable and sleep mode. The transceiver provides an adjustable output swing limiter for increasing the noise margin and a programmable output voltage range for expanding the output voltage range of the transceiver. Additionally, the MAX14858GWE+ comes with built-in ESD protection and is RoHS compliant, making it suitable for industrial, automotive, and consumer applications. The MAX14858GWE+ is a versatile transceiver IC that, when used in the right application, offers superior performance and reliability. With its high speed, low skew receiver, and adjustable output voltage range, the MAX14858GWE+ is the perfect chip for high-speed serial data transmission applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description