MAX1486EUB+T

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Transceiver
Protocol:	RS422, RS485
Number of Drivers/Receivers:	1/1
Duplex:	Full
Receiver Hysteresis:	70mV
Data Rate:	12Mbps
Voltage - Supply:	4.75 V ~ 5.25 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
Supplier Device Package:	10-uMAX
Base Part Number:	MAX1486

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX1486EUB+T Application Field and Working Principle The MAX1486EUB+T is a low-cost, single-chip, monolithic CMOS data link transceiver. This device can be used for unbalanced, point-to-point, or multi-drop data communication in a broad range of industrial, automotive, and data communication applications. It combines all of the features required for reliable and low-cost operation in a single easy-to-use package.The MAX1486EUB+T is designed to transfer data between two digital circuits over an unbalanced or point-to-point link. The device provides the necessary interface between a digital signal and the communication medium, typically an electrical line. The device is compliant with the RS-485 and TTL protocols, is able to send and receive data in both full-duplex and half-duplex modes, and provides 9-bit addressing capabilities. Additionally, it includes differential line drivers, differential line receivers, bus fault detectors, and a line turn-around circuit.The MAX1486EUB+T is composed of two interface sections, a receiver and a transmitter, as well as driver and receiver logic. The receiver section features an adjustable open- or closed-collector output for compatibility with both +/-12V and TTL logic families. The transmitter section has one open-collector output and one higher-current open-collector output. The device is powered by a 5V supply and utilizes a low power sleep mode that can reduce power consumption by up to 50%. The device includes a variety of features that make it well suited for data communication applications. It is equipped with a mechanism to detect a potential bus fault and will deselect both receiver and transmitter sections in the presence of a bus short or open. It also has separate logic-controlled transmit and receive enable inputs that allow the user to control when data is transmitted and received. The device can also be used in both half-duplex and full-duplex modes, making it suitable for both simplex and multiplex communication.The MAX1486EUB+T is the ideal choice for applications that require reliable data transfer between two nodes in a network. Its low-cost, versatile design makes it suitable for a variety of industrial, automotive, and data communication applications. With features such as bus fault detection and separate logic-controlled transmit and receive enable inputs, the MAX1486EUB+T ensures reliable and efficient data transfer. In summary, the MAX1486EUB+T is a CMOS data link transceiver designed for point-to-point or multi-drop data communication. It is compliant with RS-485 and TTL protocols, is capable of both full-duplex and half-duplex modes, and includes 9-bit addressing and bus fault detection. It is powered by a 5V supply and has a low-power sleep mode that reduces power consumption by up to 50%. The MAX1486EUB+T is a reliable and cost-effective choice for data communication applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description