MAX14998ETO+G3U

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX14998ETO+G3U is a quiescent analog switch designed for special purpose applications. It features a Programmable-Current-Limit (PCL) output driver for controlling the maximum switch current and an integrated charge pump for driving switches at high speeds in low-voltage applications. The MAX14998ETO+G3U offers low on-state resistance, low power dissipation, and high ESD protection.

The MAX14998ETO+G3U is designed to switch charge and voltage signals, and it can be used in a variety of applications, including automotive, telecommunications, storage, and motor control. The low on-state resistance allows it to be used in high-speed applications and the low power dissipation enables it to be used in battery-powered and energy-sensitive systems.

The MAX14998ETO+G3U is a single-pole, double-throw (SPDT) analog switch with a low on-state resistance of 0.7 Ω. It has two normally open switches and one normally closed switch, and it can be used to route signals from one channel to another or to isolate the inputs from the outputs. The switches can be configured to operate as a single open or closed switch, or as two independent switches. The MAX14998ETO+G3U features a maximum switch current of 150 mA.

The MAX14998ETO+G3U has two control levels, allowing it to be operated from a logic level, from a voltage source, or from a low level signal. The logic level control allows the switch to be controlled directly from a logic signal, while the voltage source control can be used to control the switch from an external voltage supply. The low level control is designed to use a signal with a minimum amplitude of 0.3 V, allowing the switch to be operated from smaller signals such as TTL and CMOS logic levels.

The MAX14998ETO+G3U has an integrated Programmable-Current-Limiter (PCL) output driver which allows the maximum switch current to be set. The PCL output driver also protects the switch from being damaged due to an inadvertent short circuit or excessive current. The MAX14998ETO+G3U also features a low power sleep mode for reducing power consumption in battery-powered applications.

The MAX14998ETO+G3U is protected from electrostatic discharge (ESD) with a built-in ESD protection module. The protection module suppresses ESD pulses greater than 3 kV, allowing the switch to be used in hazardous environments.

The MAX14998ETO+G3U is an analog switch designed for special purpose applications. It offers low on-state resistance, low power dissipation, and high ESD protection. The switch can be operated from a logic signal, a voltage source, or a low level signal and it has an integrated PCL output driver which protects the switch from being damaged due to an inadvertent short circuit. The MAX14998ETO+G3U is an ideal choice for applications in automotive, telecommunications, storage, and motor control.

The specific data is subject to PDF, and the above content is for reference