MAX1698EVKIT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX1698EVKIT evaluation board and accompanying software enables users to simply evaluate the performance of a high-current, high-efficiency, synchronous step-down switching regulator. The MAX1698EVKIT is designed to work with two input/output combinations: 24V/1A, and 24V/2A. For both combinations, the input voltage is adjustable from 28V to 24V. This output voltage is programmable for either 350mA at 2.2V or 500mA at 1.8V. The MAX1698EVKIT evaluation board provides a comprehensive kit of tools for testing and optimizing the regulator performance, which is designed for LED drivers.

The MAX1698EVKIT evaluation board is powered by a MAX1698PMB1L LED driver IC. It has an internal FET (Field Effect Transistor) and is capable of high-accuracy, high-efficiency, high-speed operation. It has a fixed switching frequency of 200kHz, allowing for higher output current without significantly increasing heat dissipation. The device also offers a low noise, low-ripple start-up with low EMF switching noise.

The MAX1698EVKIT evaluation board has a complete set of features designed for fast, easy, accurate evaluation and optimization of the regulator. It includes a MAX1699CPA, which is a linear-regulator based current-idealizing circuit suitable for applications driven by either a constant current source or a constant voltage source. The MAX1699CPA features an adjustable current limiting circuit, providing an additional layer of protection in the event of a fault and offers an adaptive transient response that helps to minimize power dissipation during load and line transients. The adjustable current limiter further helps in optimizing the output current of the system.

The MAX1698EVKIT board also offers some additional features such as an adjustable maximum duty cycle, a low-ribbon start-up and a low noise linear driver. Additionally, the board offers pull-up/pull-down options for the external components for better noise suppression. It also has a power OK indicator.

The MAX1698EVKIT evaluation board provides a detailed graphical user interface (GUI) for configuring the device, monitoring and measuring its performance, as well as testing the output load. To use the GUI, first the MAX1698PMB1L LED driver IC must be connected to the board. Then, the user can select one of the two output/input combinations, adjust the target voltage and current, and the corresponding LED array. The GUI also allows the user to modify the pulse-width modulation (PWM) settings, the current limit and maximum duty cycle, and monitor the parameters of the regulator in real-time.

The MAX1698EVKIT evaluation board is an invaluable tool for designers to quickly and easily evaluate and optimize their regulator system. It simplifies the process of prototype development and debugging, allowing for shorter design cycles. It also features various features to reduce power dissipation and maximize efficiency. The MAX1698EVKIT is a useful device for evaluating and optimizing systems for use with high-current, high-efficiency, synchronous step-down switching regulators.

The specific data is subject to PDF, and the above content is for reference