MAX2059ETL+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF amplifiers are essential components used in a variety of electronic systems associated with radio-frequency (RF) signal propagation and processing. They are used for amplifying weak signals, as well as providing gain, filtering, and impedance matching. The MAX2059ETL+T is a high-performance, wideband RF amplifier that is suitable for use in a wide range of applications. This article will look at the application field and working principle of the MAX2059ETL+T.

Application Field of MAX2059ETL+T

The MAX2059ETL+T is a low-power, high-performance general purpose amplifier optimized for use in a variety of RF applications. It features a wide gain range from -3.0 to +15dB, on-board TTL logic support, and a low noise figure of 1.5dB, making it suitable for a wide range of applications, such as:

• Low-noise receiver amplifiers
• High-dynamic range signal processing
• High-power signal transmission
• Front-ends for RF and microwave applications

Working Principle of MAX2059ETL+T

The MAX2059ETL+T RF amplifier consists of two stages interconnected by an output transformer. The first stage is a low-noise amplifier (LNA), which amplifies the low-level signal. The second stage is a voltage-to-current power amplifier (V-I PA), which amplifies the output of the first stage. Both the LNA and PA stages are provided with positive feedback for improved performance and to suppress spurious signals. The amplifier is powered from a single +12V supply, and is provided with on-board TTL logic control and gain control.

The amplifier has a low noise figure of 1.5dB and a wide gain range of -3.0 to +15dB. It has an input/output (I/O) power of 25dBm, and a 1dB compression point (P1dB) of 17dBm. The amplifier operates over a wide frequency range of 0.1 to 10GHz, and is suitable for use in a wide range of low noise receiver applications, as well as other RF applications. The amplifier is capable of delivering a maximum output power of 33dBm into a 50Ω load.

The amplifier also features an on-chip protection circuit, which provides protection in case of fault conditions, such as over-current and over-temperature. The on-board TTL logic support allows for control of the amplifier’s gain and power levels.

Conclusion

The MAX2059ETL+T is an ideal solution for a wide range of general-purpose RF applications, such as low-noise receiver amplifiers, high-dynamic range signal processing, high-power signal transmission, and front-ends for RF and microwave applications. The amplifier is highly integrated and provides a low noise figure of 1.5dB, as well as a wide gain range of -3.0 to +15dB. It has an input/output (I/O) power of 25dBm, and a 1dB compression point (P1dB) of 17dBm, and provides on-board TTL logic support and protection circuitry. The MAX2059ETL+T is ideal for use in a variety of RF applications.

The specific data is subject to PDF, and the above content is for reference