MAX4553CEE+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX4553CEE+T devices are a family of analog switches, multiplexers, and demultiplexers used in applications where signals need to be routed from one point to another. These devices provide high input impedance, low power consumption, wide manipulation range, and accurate switching threshold.

The MAX4553CEE is a single-pole double-throw (SPDT) switch capable of switching two signals between two points. The switch is triggered by the logic level of a control signal at its control input. When the control signal is high, the two signals at the two inputs are connected, otherwise the connection is broken. The switch also has a high input impedance and a minimum capacitive load of 11pF. It can also be used in bipolar signal systems with signal doses in the -14 V to +14 V range.

The MAX4553T is a digital signal multiplexer designed to switch high-impedance analog signals of up to 14 volts. This device can be used to control up to 8 individual channels. The device has a low on-resistance of 7 ohms, and a high off impedance of 1M ohm. It also has a wide manipulation range, providing a signal bandwidth of 1kHz to 1.5MHz. It also has a low power consumption, using only 60mA of current when powered with a 5V supply.

The MAX4553CEE+T devices utilize two separate control signals to allow for selective-disable and simultaneous-closing functions. The controls signals can be logic levels or analog signals ranging from -14 V to +14 V. Selective disabling is accomplished when both control signals are high, upon which all switches connected to the control lines are disabled. Simultaneously closing the switches is accomplished by pulling both control signals low. Both control signals can also be used in combination to toggle the switches on and off with a single command.

The working principle of these devices is relatively straightforward. The input control signals are routed to the corresponding pins of the switch, while the output signals are conducted to the corresponding pins via the internal switching pathways. When the control signals are at their logic levels, the outputs and inputs remain disconnected, but when the control signals switch to the other logic level, the output and input connections are established. The MAX4553CEE+T is available in SOIC and DIP packages.

The MAX4553CEE+T devices offer excellent solutions for high-impedance analog and digital signal routing applications. With its high input impedance, wide manipulation range, and accurate switching threshold, it can be used in a variety of applications such as telecom, industrial, and automotive systems. Additionally, the device\'s low power consumption and small form factor make it a cost-effective solution for these applications.

The specific data is subject to PDF, and the above content is for reference