MAX4582ESE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX4582ESE is an analog switch multiplexer/demultiplexer. It is a dual single-pole, double-throw analog switch made with bipolar nmOS technology. The device has an enabling input and separate output control inputs on both sides of the switch allowing one side to be enabled while leaving the other side disabled. The low-on-resistance of the MAX4582ESE (typically 0.3Ω at +25°C) provides low signal distortion while allowing signals up to 10V to be switched reliably.

The MAX4582ESE has a wide range of applications, from market-specific applications such as test and measurement to consumer-related applications such as instrumentation. It can be used for signal routing in audio/visual equipment, data acquisition systems and medical/analog instrumentation. The low-on-resistance, high isolation, and fast switching speeds make it suitable for use in low- power switching applications such as cellular phones, satellite receivers, and portable instrumentation.

Principles of Operation

The MAX4582ESE is a dual single-pole double-throw (SPDT) switch made with bipolar nmOS technology. It is designed to operate from a single +2.7V to +5.4V power supply. Each switch has an enabling (ENA) input and separate output control (SELA/SELB) inputs for each side of the switch. When the ENA input is high (at +2.7V or higher), the outputs of the selected switch are connected to their respective inputs. When the ENA input is low (below +2.7V), both sides of the switch are disabled and their outputs are connected to ground.

The device also has standby and shutdown modes. When the ENA input is in the low state, the HV switches are disabled and the outputs are connected to ground. However, if the ENA input is held high and either SELA or SELB input is held low, the selected switch is disabled, and the output is connected to ground.

The MAX4582ESE has a low on-resistance of 0.3Ω and can handle voltages up to 10V, making it suitable for applications where signal distortion needs to be minimized. The device also has high frequency switching capability, making it suitable for applications where the signal has to be switched very quickly.

The MAX4582ESE supports both single-ended and differential switching. The single-ended range supports voltages from 0V to +10V. The differential range supports differences from +1V to −1V. The device also has two common-mode ranges: from +2.7V to +5V for single-ended, and from 0V to +10V for differential.

The MAX4582ESE is a high-performance device that provides reliable operation in a wide variety of applications. Its low-on-resistance, high isolation, and fast switching speeds make it suitable for low-power switching applications. The device is also well-suited for applications that require high switching rates or wide voltage ranges.

The specific data is subject to PDF, and the above content is for reference