MAX4593CPE

Switch Time (Ton, Toff) (Max):	80ns, 45ns
Base Part Number:	MAX4593
Supplier Device Package:	16-PDIP
Package / Case:	16-DIP (0.300", 7.62mm)
Operating Temperature:	0°C ~ 70°C (TA)
Crosstalk:	-85dB @ 10MHz
Current - Leakage (IS(off)) (Max):	100pA
Channel Capacitance (CS(off), CD(off)):	9pF, 9pF
Charge Injection:	2pC
-3db Bandwidth:	--
Series:	--
Voltage - Supply, Dual (V±):	--
Voltage - Supply, Single (V+):	3 V ~ 16 V
Channel-to-Channel Matching (ΔRon):	500 mOhm
On-State Resistance (Max):	20 Ohm
Number of Circuits:	4
Multiplexer/Demultiplexer Circuit:	1:1
Switch Circuit:	SPST - NO/NC
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

MAX4593CPE is a high-speed, low response time, low on-resistance analog switch device. It consists of two single-pole/double-throw (SPDT) switches and will operate over a wide range of supply voltages, from 2.7 V to 5.5 V. It has micro-power standby current of 0.1 μA typ, low channel-to-channel charge injection of 0.8 pC typ, and fast switching time of 6 ns typ.MAX4593CPE is available in both 8-pin SOIC (Small Outline Integrated Circuit) and 8-pin DIP (Dual In-line Packages) packages and is temperature range from -40°C to +85°C.The MAX4593CPE is designed for multiplexing applications, analog switching applications, sample-and-hold circuit applications, and electronically selectable gain control. The MAX4593CPE is ideal for applications demanding high performance and low power consumption.

Application Field and Working Principle

The MAX4593CPE can be used for a wide array of applications such as multiplexing, analog switching, sample-and-hold circuits, and electronically selectable gain control. Its low on resistance, fast switching time, and low standby current make the MAX4593CPE the ideal choice for applications that need high performance and low power consumption.The MAX4593CPE consists of two SPDT switches, with each switch having two input terminals (A and B) and one output terminal (O). When the select input (S) is logic low (0V), the output terminal (O) is connected to the A input terminal and when S is logic high (VCC), the output terminal is connected to the B input terminal. The MAX4593CPE is designed to switch at relatively low voltage levels. Max4593CPE can also be used in combination with other analog switches to create larger multiplexers or demultiplexers.

Conclusion

The MAX4593CPE is suitable for low power applications requiring fast switching speed, low on-resistance, low channel-to-channel charge injection and micro-power standby current. With its wide range of supply voltages, fast switching time and small footprint, the MAX4593CPE is an excellent choice for any application where high performance and low power consumption are essential.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description