MAX4616EUD+

Switch Time (Ton, Toff) (Max):	12ns, 10ns
Base Part Number:	MAX4616
Supplier Device Package:	14-TSSOP
Package / Case:	14-TSSOP (0.173", 4.40mm Width)
Operating Temperature:	-40°C ~ 85°C (TA)
Crosstalk:	-96dB @ 100kHz
Current - Leakage (IS(off)) (Max):	1nA
Channel Capacitance (CS(off), CD(off)):	5pF, 5pF
Charge Injection:	6.5pC
-3db Bandwidth:	70MHz
Series:	--
Voltage - Supply, Dual (V±):	--
Voltage - Supply, Single (V+):	2 V ~ 5.5 V
Channel-to-Channel Matching (ΔRon):	200 mOhm
On-State Resistance (Max):	10 Ohm
Number of Circuits:	4
Multiplexer/Demultiplexer Circuit:	1:1
Switch Circuit:	SPST - NO/NC
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The MAX4616EUD+ is an ultra-high-speed, low-voltage analog switch. It is a fully-integrated, low-cost analog switch IC widely used in Interface - Analog Switches, Multiplexers, Demultiplexers design. It features an on-chip control logic circuit and serves as an interface between the analog and digital sections of a system.

Application Field

The MAX4616EUD+ is ideal for applications that require multiplexing, demultiplexing, or signal routing, such as video switching, data format conversion, audio, and video signal processing. In a video switch application, for example, the analog switch will be used to route signals from one source to multiple outputs. This is done by routing the video signal through the multiplexer, which allows the user to select which output to send the signal to.The MAX4616EUD+ is also widely used in audio applications, such as audio or video signal conditioning, electronic instruments, and low-power audio systems. It can be used to route signals to and from audio amplifiers, digital-to-analog and analog-to-digital converters, and other audio devices.

Working Principle

The MAX4616EUD+ is an analog switch with an integrated, low-voltage control logic circuit. It consists of two sections: the control logic circuit, which decides when and where the analog signal will be routed, and the switch array, which actually carries out the routing of the signal.The control logic circuit consists of a microcontroller, a ROM, and a set of dedicated logic cells. The microcontroller is responsible for monitoring the analog signal, interpreting user commands, and generating control signals. The ROM stores the user commands that the microcontroller will use to control the switch array. The logic cells are responsible for translating the control signals from the microcontroller into the logic signals needed to control the switch array.The switch array consists of a set of MOSFETs that are used to either connect or disconnect the analog signal paths. The MOSFETs are connected in series or parallel and the control signals from the microcontroller determine which MOSFETs will be activated, thus controlling the routing of the analog signal.

Conclusion

The MAX4616EUD+ is an ultra-high-speed, low-voltage analog switch IC widely used in Interface - Analog Switches, Multiplexers, Demultiplexers design. It features an on-chip control logic circuit and serves as an interface between the analog and digital sections of a system. It is an ideal choice for applications that require multiplexing, demultiplexing, or signal routing, such as video switching, data format conversion, audio, and video signal processing. Its integrated control logic circuit and switch array is responsible for detecting user commands, interpreting them, and routing the analog signal accordingly.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description