MAX4633ESE+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog switches, multiplexers, and demultiplexers are all components of an interface. The MAX4633ESE+T is a single channel, standalone analog COS/MOS switch or analog multiplexer. The ‘ESE+’ and ‘T’ suffixes in the MAX4633ESE+T represent the device type and package type respectively. The MAX4633ESE+T can be used in various applications, such as audio and video switching, audio and video routing, data and signal switching, multiplexing, and even for delay/de-emphasis monolithic IC.

The MAX4633ESE+T offers a single-pole, double-throw (SPDT) switch or four-to-one (4: 1) analog multiplexer. It provides low-distortion switching with very low 1/f noise and a wide control voltage range. The control voltage is applied to the X pin, which controls the switches of the device. The power supply can be a single dual supply voltage or a split supply voltage of ±1.6 V to ±6.5 V. To reduce the effect of latch-up, it provides supply current and ground shared power.

The MAX4633ESE+T features low on-resistance of 0.7Ω and flatness of less than 0.15Ω. Its low control voltage and low off-leakage current help it to provide better performance. The off-leakage current is less than 5 nA at 3V. Also, it provides high switching speed, with a rise/fall time of 2.5/4.5 ns and switching time of 8 ns. It also has a high level of supply-noise rejection (CMRR) of 69 dB.

The MAX4633ESE+T offers low-distortion switching and high-speed bidirectional analog multiplexing. The low, off-leakage current, the wide control voltage range, and the low power dissipation circuit are all benefits of the MAX4633ESE+T. The device is also equipped with a low-noise analog switch, low drive voltage, low on-resistance, and low distortion. This makes it very suitable for a variety of applications, ranging from analog signal routing to audio and video switching.

The MAX4633ESE+T also has an excellent off-isolation capability, with wideband isolation of more than 46 dB. It has excellent linearity and uniform step size. This ensures that the device does not require any additional component for proper operation. The device also has a 20 dB max inhibit function that ensures that no switching occurs when the X pin is pulled low. Further, the device has an enable pin which can be used to disable the analog switch.

In summary, the MAX4633ESE+T provides a low-distortion switching with very low 1/f noise and wide control voltage range. It is an excellent choice for applications such as audio and video switching, audio and video routing, data and signal switching, multiplexing, and delay/de-emphasis monolithic IC. Its low, off-leakage current, wide control voltage range, and low power dissipation circuit make it a very suitable component for analog signal routing.

The specific data is subject to PDF, and the above content is for reference