MAX6310UK35D2-T

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Type:	Multi-Voltage Supervisor
Number of Voltages Monitored:	2
Output:	Push-Pull, Totem Pole
Reset:	Active Low
Reset Timeout:	20 ms Minimum
Voltage - Threshold:	3.5V, Adj
Operating Temperature:	0°C ~ 70°C (TA)
Mounting Type:	Surface Mount
Package / Case:	SC-74A, SOT-753
Supplier Device Package:	SOT-23-5
Base Part Number:	MAX6310

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC - Supervisors: MAX6310UK35D2-T Application Field and Working Principle

A supervisor is a specialized voltage monitoring IC used in electronics circuit design. The MAX6310UK35D2-T is one such supervisor integrated circuit (IC) manufactured by Maxim Integrated. It provides a variety of features that provide accurate voltage detection and regulation. This article will discuss the application field of MAX6310UK35D2-T, as well as its working principle.

Application Field

The MAX6310UK35D2-T comes in two common versions: 8-pin LLP and 8-pin SSOP. It is based on CMOS technology and is typically used in a variety of devices including battery monitoring, industrial power supplies, portable electronics, AC/DC converters and automotive electronics. In battery monitoring applications, the MAX6310UK35D2-T supervisor can be used to accurately detect low battery voltage conditions. This helps prevent damage to the batteries by limiting the draw of current as the battery voltage decreases. In industrial power supplies, the MAX6310UK35D2-T supervisor can be used to accurately detect overvoltage and undervoltage conditions. This helps prevent damage to the circuits by providing protection against high voltage or low voltage conditions. In portable electronics, the MAX6310UK35D2-T supervisor can be used to detect input power conditions, so that the circuit can be safely powered up and down. It is also used for monitoring the voltage of external power sources or battery packs.In AC/DC converters, the MAX6310UK35D2-T supervisor can be used to detect conditions such as overvoltage and undervoltage. It can also be used to monitor the current signal to help regulate the output voltage. It can also be used to detect situations where the load is drawing more current than expected, which can cause the output voltage to drop.In automotive electronics, the MAX6310UK35D2-T supervisor can be used to protect the circuit against high voltage or low voltage conditions. It can also be used to detect input power conditions, so that the circuit can be safely powered up and down.

Working Principle

The MAX6310UK35D2-T supervisor is based on a CMOS technology. It contains a series of comparators and voltage detectors which are used to detect voltage changes. The MAX6310UK35D2-T has two independent inputs, which are connected to an external voltage source. When the voltage of the inputs exceeds or falls below the preset threshold voltages, the output of the MAX6310UK35D2-T will change accordingly.The MAX6310UK35D2-T supervisor also contains a built-in voltage regulator. The voltage regulator takes the input voltage and converts it to a constant output voltage, which can be set to any value between 3.5V and 5.5V. This helps to protect the circuitry against high voltage and low voltage conditions. The MAX6310UK35D2-T supervisor is also equipped with a variety of features that make it a versatile solution for a wide range of applications. It has a wide input voltage range, which is adjustable from -40V to +40V. It is also equipped with a power fail input and power fail output, which can be used to detect power failure conditions, and either activate an alarm or alert system, or shut down the device. In addition, the MAX6310UK35D2-T supervisor is equipped with a wide variety of protection features. It has short-circuit protection, open-drain output, and thermal shutdown protection. These features help to ensure that the circuit is protected against a wide variety of conditions, such as over-current, over-voltage, and under-voltage.

Conclusion

The MAX6310UK35D2-T supervisor is a versatile and reliable solution for a wide range of electronic circuits. It is based on a CMOS technology and offers a wide range of features, such as over-voltage and under-voltage detection, short-circuit protection, open-drain output, and thermal shutdown protection. The supervisor is commonly used in a variety of applications, including battery monitoring, industrial power supplies, portable electronics, AC/DC converters and automotive electronics. The MAX6310UK35D2-T is an ideal solution for providing accurate voltage detection and protection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description