MAX6414UK175+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX6414UK175+T is a precise Micropower Voltage Supervisor with a built-in reset timer. It offers an integrated precision voltage reference, allowing not-monitoring of VCC supply. It also features an active-low, totem-pole reset output with a set delay time of 175ms. Designed to provide the most accurate monitoring of system power supplies, the MAX6414UK175+T can be used in a number of applications, including computer, home appliance, telecom and industrial control.

This voltage supervisor is part of the PMIC – Supervisors range from Maxim Integrated. It provides a regulated output voltage of 5.00V, with a tolerance for lower voltages as low as 4.63V. It also offers an active-high voltage monitor output that can be used to detect power failure. The MAX6414UK175+T is capable of operating over a wide temperature range (–40°C to +125°C)

The working principle of the MAX6414UK175+T is simple. A precision voltage reference is randomly sampled against an external voltage supply, with an internal comparator used to identify any input voltage greater than the reference. When the threshold is exceeded, the active-low reset pin is pulled low, providing a reset signal to the system. A built-in one-shot timer delays the reset output for a given period of time, allowing the system to reset before resuming normal operation.

The MAX6414UK175+T is designed for use in a variety of applications. It is suitable for use in high-reliability systems where low power consumption is a primary concern. It can be used to monitor systemvcc supplies, providing an early warning of power supply failure. It can also be used in personal computers and home appliances to ensure that the system power supply remains within specified limits. Finally, it can be used in telecom and industrial systems to monitor for overvoltage and undervoltage conditions.

In summary, the MAX6414UK175+T is part of the PMIC – Supervisors range from Maxim Integrated. It offers an integrated precision voltage reference to monitor VCC, an active-low, totem-pole reset output with a reset delay time of 175ms, and it is capable of operating over a wide temperature range. The MAX6414UK175+T can be used to detect power failure and can be used in a variety of systems to ensure that the system power supply remains within specified limits.

The specific data is subject to PDF, and the above content is for reference