MAX6673AXK+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Temperature Sensors are important components for many applications, from automotive and industrial to home and medical. The MAX6673AXK+T is an Analog and Digital Output Temperature Sensor with an extensive range of application fields and a simple working principle. This article will explain the MAX6673AXK+T application fields and working principle to better understand the use, benefits, and limitations of the device.

The MAX6673AXK+T is a temperature sensor with a wide measurement range of -55°C to +150°C. For ease of use, the sensor is provided with a preconfigured temperature range of -20°C to +85°C. This makes it a suitable option for various purposes like industrial and automotive electronics. The device is also available with dual outputs of either Digital (E2PROM) or Analog types.

The working principle of the MAX6673AXK+T is based on an on-chip, fixed-gain amplifier. This amplifier takes a proportional voltage input and converts it to digital data in the form of an output signal. The resulting signal can be used to control and accurately measure temperature. With this setup, it is possible to obtain precise measurements from the MAX6673AXK+T.

The MAX6673AXK+T has several fields of application. One is K-type thermocouple measurement for industrial, automotive, or consumer applications. With a typical error of 0.1°C, this device can be easily used for fast and accurate temperature measurement. Moreover, the MAX6673AXK+T provides better noise immunity than standard thermocouples as it has an on-chip filter and can reject unwanted high-frequency noise. This leads to improved signal quality and accuracy for temperature measurements.

It can also be used to measure temperature from RTDs. Its resolution of 10-bit as well as a wide range of Temperature Coefficients of Resistance (TCR) options makes it suitable for accurate temperature measurement. And the device offers a single-supply operation of +3.3V to +11V.

The analog output type of the MAX6673AXK+T, known as ‘A-O’, also provides fast conversion times with accuracy of 0.2°C. The A-O output is composed of two identical outputs on a single 18-pin TSSOP. This simplifies the design and reduces board space with double-speeds of conversion time for a given application. The A-O output type also uses 12-bit codes with a conversion time of 500 microseconds.

The digital output type of the MAX6673AXK+T, known as ‘D-O’, is of low-cost and low-power design. The D-O output can be saved as calibrated data for accurate temperature measurement without any further calibration. The temperature data can also be read and stored using a simple 2-wire serial interface. It also has an integrated analog resistor-based temperature measurement circuitry which allows the device to be used in small-sized applications.

The MAX6673AXK+T also provides 16-bit resolution and long-term stability with a maximum error of 0.2°C. It has a wide temperature range of -55°C to +150°C and an extremely fast conversion time of up to 8ms. Also, the device offers low-cost, low-power operation with a minimum standby current of 0.3mA.

In summary, the MAX6673AXK+T is a temperature sensor with wide application field including industrial, automotive, and consumer applications. It has a simple working principle based on on-chip fixed amplifier with digital and analog output options. It also has a wide temperature range with excellent precision and fast conversion times. With its long-term stability, low-cost/low-power performance, and accurate measurements, the MAX6673AXK+T is a suitable choice for temperature measurement.

The specific data is subject to PDF, and the above content is for reference