MAX6719AUTSHD3+T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Integrated circuits (ICs) are a basic component used for integrating components in most electronic devices. In the field of digital integrated mass production, Power Management Integrated Circuits (PMIC) are one of the most widely used ICs. PMICs are a type of ICs specifically designed to control the power supply and speed of the device, and much of the same functionality can be found in other integrated circuit types such as supervisors. The MAX6719AUTSHD3+T is just one example of a supervisor type PMIC, one which functions as a limit supervisor to prevent overvoltage and over-current in a wide range of applications.

The MAX6719AUTSHD3+T is a 3-pin voltage supervisor IC manufactured by Maxim Integrated Products, Inc., a company specialized in PMICs and other integrated circuits. This particular IC has a wide operating temperature range of -40°C to +125°C, making it suitable for many applications where temperature fluctuations occur. For example, automotive, industrial and medical applications can use MAX6719AUTSHD3+T to help ensure device performance and reliability.

The MAX6719AUTSHD3+T is capable of monitoring two independent DC power supplies, which can be configured for either continuous or one-time mode monitoring. In addition, it has both an active low RESET output and an open-drain N_OUT output, for reset and power control. Both outputs can be separately enabled/disabled, and the RESET output can be configured for either active-high or active-low operation. This allows for a variety of application possibilities, including monitoring dual supply voltages, reset functions or power-on-off control.

The MAX6719AUTSHD3+T is a low-power CMOS IC that consumes statically less than 10uA of current, making it suitable for environmentally conscious designs. It operates from a single 2.97V to 4.63V power supply, which is suitable for most systems, and is designed to protect against EMI and ESD. The IC also offers a wide analog input voltage range from 0V to 7V and an adjustable reset threshold range from 1.47V to 4.63V.

In terms of its functioning, the MAX6719AUTSHD3+T uses a comparator, voltage reference and logic circuitry to achieve its limit supervisor capabilities. The comparator monitors the input/output voltage and compares it to the set reset threshold. If the signal is detected to be exceeding the reset threshold, the comparator sends a signal to the logic circuit, which in turn causes the RESET or N_OUT signal to be generated. The signal remains active until the input voltage falls below the reset threshold, at which point the comparator resets and the RESET signal goes back low.

Due to its flexible operating range and relatively low power requirements, the MAX6719AUTSHD3+T is an ideal solution for many applications. It is particularly well suited to automotive, industrial and medical applications, where temperature fluctuations can occur and the need for EMI/ESD protection is paramount. In addition, it is a great choice for any system that needs dual-supply monitoring or device reset/power control.

The specific data is subject to PDF, and the above content is for reference